Loading and unloading forces following addition of 5% Cu in nickel-titanium alloy used for orthodontics

Loading and unloading forces following addition of 5% Cu in nickel-titanium alloy used for orthodontics

© 2017 Trans Tech Publications. This study aims to address the amount of force delivered by a fabricated NiTiCu orthodontic wire with a ternary composition ratio of 46.0 Ni: 49.0 Ti: 5.0 Cu and to compare the results with a commercial NiTiCu35°C orthodontic archwire. Nickel (purity 99.9%), Titanium...

Saved in:

書目詳細資料
Main Authors:	Aphinan Phukaoluan, Surachai Dechkunakorn, Niwat Anuwongnukroh, Anak Khantachawana, Pongpan Kaewtathip, Julathep Kajornchaiyakul, Wassana Wichai
其他作者:	King Mongkut s University of Technology Thonburi
格式:	Conference or Workshop Item
出版:	2018
主題:	Engineering
在線閱讀:	https://repository.li.mahidol.ac.th/handle/123456789/42644
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!
機構:	Mahidol University

相似書籍

Improvement of mechanical and biological properties of TiNi alloys by addition of Cu and Co to orthodontic archwires
由: Aphinan Phukaoluan, et al.
出版: (2018)

Improvement of mechanical and biological properties of TiNi alloys by addition of Cu and Co to orthodontic archwires
由: Aphinan Phukaoluan, et al.
出版: (2018)

Composition and transitional temperature range of several nickel-titanium alloy wires in orthodontic treatment
由: Rutchadakorn Isarapatanapong, et al.
出版: (2018)

Comparison of friction forces between stainless orthodontic steel brackets and TiNi wires in wet and dry conditions
由: Aphinan Phukaoluan, et al.
出版: (2018)

Comparison of friction forces between stainless orthodontic steel brackets and TiNi wires in wet and dry conditions
由: Aphinan Phukaoluan, et al.
出版: (2018)

Effect of the Addition of 3% Co in NiTi Alloy on Loading/Unloading Force
由: A. Phukaoluan, et al.
出版: (2018)

Effect of direct electric resistance heat treatment on loading/unloading behavior of nickel titanium orthodontic wire
由: Surachai Dechkunakorn, et al.
出版: (2018)

Comparison of loading and unloading behavior of commercial and locally made copper-nickle-titanium (NiTiCu) orthodontic archwire
由: V. Puranitee, et al.
出版: (2018)

Assessment of corrosion behavior in artificial saliva of wires for orthodontic applications
由: Aphinan Phukaoluan, et al.
出版: (2019)

Comparison of chemical properties and Ni release of stainless steel and nickel titanium wires
由: Wassana Wichai, et al.
出版: (2018)

Effect of Cu and Co additions on corrosion behavior of NiTi alloys for orthodontic applications
由: A. Phukaoluan, et al.
出版: (2018)

Comparison of the initial repeated bond strength among three orthodontic bonding systems
由: Niwat Anuwongnukroh, et al.
出版: (2018)

Shear bond strength and ARI score of chemically cured orthodontic adhesive resins
由: Pacharapilai Nidhiritdhikrai, et al.
出版: (2018)

Frictional and mechanical properties of surface modified nickel-titanium orthodontic archwires
由: Natthalak Tantiwinyupong, et al.
出版: (2020)

Degree of conversion of three light-cured orthodontic adhesives
由: Wassana Wichai, et al.
出版: (2019)

Mechanical properties of several NiTi alloy wires in three-point bending tests
由: Surachai Dechkunakorn, et al.
出版: (2018)

Cytotoxicity of three light-cured orthodontic adhesives
由: Natthasit Pudpong, et al.
出版: (2019)

Property improvement of TiNi by Cu addition for orthodontics applications
由: A. Phukaoluan, et al.
出版: (2018)

Influence of mouthwash rinsing on the mechanical properties of polymeric ligature ties used for dental applications
由: Aphinan Phukaoluan, et al.
出版: (2022)

Impact of household vinegar on calculus removal and mechanical properties of orthodontic resin
由: Binit Shrestha, et al.
出版: (2020)

An investigation of fluoride release from orthodontic elastomeric ligatures
由: Nuttachai Viriyakosol, et al.
出版: (2018)

Comparison of the mechanical properties of thai nonlatex with commercial latex orthodontic elastics for orthodontic application
由: Surachai Dechkunakorn, et al.
出版: (2018)

Influence of third element of TiNi alloy on tribological behavior in dry and wet conditions for orthodontic applications
由: A. Phukaoluan, et al.
出版: (2020)

Cytotoxicity of an experimental light-cured orthodontic adhesive
由: Kanin Nimcharoensuk, et al.
出版: (2020)

Degree of conversion of experimental light-cured orthodontic adhesives
由: Kanin Nimcharoensuk, et al.
出版: (2020)

Effect of laser welding on mechanical properties of round-rectangular nickel-titanium (NiTi) orthodontic wires
由: Peerapong Santiwong, et al.
出版: (2022)

Comparisons of the Mechanical Properties of 3 Commercial Brands of Non-latex Orthodontic Elastics
由: Vantida Jittanonda, et al.
出版: (2018)

Assessment of mechanical properties and transformation behavior of locally-made Ni-Ti alloys used in orthodontics
由: N. Chiranavanit, et al.
出版: (2018)

Effect of surface treatment on physical and mechanical properties of nickel-titanium orthodontic archwires by fine particle shot peening method
由: Wittawat Mongkolchart, et al.
出版: (2020)

Elution study of three light-cured orthodontic adhesives
由: Pitchaya Roongrujimek, et al.
出版: (2020)

Comparison of mechanical properties between thai orthodontic elastics with different ammonia contents and commercial orthodontic elastics
由: Niwat Anuwongnukroh, et al.
出版: (2018)

Shear bond strength of three light-cured orthodontic adhesives
由: Kanin Nimcharoensuk, et al.
出版: (2019)

Comparison of mechanical properties of three different orthodontic latex elastic bands leached with NaOH solution
由: Thipsupar Pureprasert, et al.
出版: (2018)

Effect of Temperature on Deactivation Force of Three Commercial NiTi Orthodontic Archwires
由: Niwat Anuwongnukroh, et al.
出版: (2018)

Comparison of horizontal and vertical deactivation force, length and superelasticity in three commercial NiTi orthodontic archwires
由: Surachai Dechkunakorn, et al.
出版: (2018)

Comparison of dimensions and residual forces of various orthodontic elastomeric ligatures
由: Niwat Anuwongnukroh, et al.
出版: (2018)

Comparison of the mechanical properties of three commercial orthodontic NiTi round archwires
由: Surachai Dechkunakorn, et al.
出版: (2018)

Antibacterial Effect of Experimental Orthodontic Adhesives Containing Gold Nanoparticles Against Streptococcus mutans and Streptococcus sobrinus
由: Pinyada Akarajarasrod, et al.
出版: (2022)

Residual force of orthodontic elastomeric ligature
由: Surachai Dechkunakorn, et al.
出版: (2018)

Failure site and ARI score of rebonded brackets using no-mix adhesive resins
由: Niwat Anuwongnukroh, et al.
出版: (2018)