Temperature programmed desorption of F-doped SnO<inf>2</inf>films deposited by inverted pyrosol technique

Fluorine-doped tin dioxide (FTO) films were deposited on silicon wafers by inverted pyrosol technique using solutions with different doping concentration (F/Sn=0.00, 0.12, 0.75 and 2.50). The physical and electrical properties of the deposited films were analyzed by SEM, XRF, resistivity measurement...

全面介紹

Saved in:
書目詳細資料
Main Authors: S. Aukkaravittayapun, C. Thanachayanont, T. Theapsiri, W. Veerasai, Y. Sawada, T. Kondo, S. Tokiwa, T. Nishide
其他作者: Thailand National Metal and Materials Technology Center
格式: Conference or Workshop Item
出版: 2018
主題:
在線閱讀:https://repository.li.mahidol.ac.th/handle/123456789/23153
標簽: 添加標簽
沒有標簽, 成為第一個標記此記錄!
實物特徵
總結:Fluorine-doped tin dioxide (FTO) films were deposited on silicon wafers by inverted pyrosol technique using solutions with different doping concentration (F/Sn=0.00, 0.12, 0.75 and 2.50). The physical and electrical properties of the deposited films were analyzed by SEM, XRF, resistivity measurement by four-point-probe method and Hall coefficient measurement by van der Pauw method. The electrical properties showed that the FTO film deposited using the solution with F/Sn=0.75 gave a lowest resistivity of 3.2•10-4ohm cm. The FTO films were analyzed by temperature programmed desorption (TPD). Evolved gases from the heated specimens were detected using a quadruple mass analyzer for mass fragments m/z, 1(H+), 2(H2+), 12(C+), 14(N+), 15(CH3+), 16(O+), 17(OH+or NH3+), 18(H2O+or NH4+), 19(F+), 20(HF+), 28(CO+or N2+), 32(O2+), 37(NH4F+), 44(CO2+), 120(Sn+), 136(SnO+) and 152(SnO2+). The majority of evolved gases from all FTO films were water vapor, carbon monoxide and carbon dioxide. Fluorine (m/z 19) was detected only in doped films and its intensity was very strong for highly-doped films at temperature above 400°C. © 2006 Akadémiai Kiadó.