อุทกพลศาสตร์ของสารป้อนผสมในเครื่องฟลูอิไดซ์เบดแบบหมุนเวียน

วิทยานิพนธ์ (วท.ม.)--จุฬาลงกรณ์มหาวิทยาลัย, 2547

محفوظ في:
التفاصيل البيبلوغرافية
المؤلف الرئيسي: สมชาย สวยสอาด, 2522-
مؤلفون آخرون: สุชญา นิติวัฒนานนท์
التنسيق: Theses and Dissertations
اللغة:Thai
منشور في: จุฬาลงกรณ์มหาวิทยาลัย 2007
الموضوعات:
الوصول للمادة أونلاين:http://cuir.car.chula.ac.th/handle/123456789/4078
الوسوم: إضافة وسم
لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!
المؤسسة: Chulalongkorn University
اللغة: Thai
id th-cuir.4078
record_format dspace
spelling th-cuir.40782008-04-30T12:09:15Z อุทกพลศาสตร์ของสารป้อนผสมในเครื่องฟลูอิไดซ์เบดแบบหมุนเวียน Hydrodynamics of mixed feed in circulating fluidized bed สมชาย สวยสอาด, 2522- สุชญา นิติวัฒนานนท์ จุฬาลงกรณ์มหาวิทยาลัย. คณะวิทยาศาสตร์ ฟลูอิไดเซชัน ชีวมวล วิทยานิพนธ์ (วท.ม.)--จุฬาลงกรณ์มหาวิทยาลัย, 2547 ศึกษาการทำงานของเครื่องฟลูอิไดซ์เบดแบบหมุนเวียนที่อุณหภูมิห้อง โดยท่อไรเซอร์สร้างจากท่อพลาสติกใสขนาดเส้นผ่านศูนย์กลางไรเซอร์ 0.05 เมตร สูง 2 เมตร และท่อป้อนกลับขนาดเส้นผ่านศูนย์กลาง 0.10 เมตร สูง 1.20 เมตร เพื่อให้เห็นถึงการเคลื่อนตัวของสารป้อนผสม ที่เปลี่ยนแปลงเนื่องจากอัตราการไหลของอากาศ และอัตราการไหลป้อนกลับของของแข็ง ที่มีต่อความดันและความเร็วของอนุภาคที่ตำแหน่งต่างๆ ตามความสูงของไรเซอร์ โดยค่าความดันไปคำนวณหาสัดส่วนของแข็ง และใช้เทคนิคการบันทึกภาพด้วยกล้องความเร็วสูง CCD Camera ร่วมกับการใช้โปรแกรม Image Pro Plus V.4.5.1 เพื่อหาความเร็วของของแข็ง อัตราการไหลของอากาศอยู่ในช่วง 300-500 ลิตรต่อนาที ของแข็งที่นำมาศึกษาคือ ทราย ขี้เลื่อย แกลบ และชานอ้อยที่มีความหนาแน่น 2312, 1583, 1484 และ 630 กิโลกรัมต่อลูกบาศก์เมตร ตามลำดับ ขนาดอนุภาคอยู่ในช่วง 250-425 ไมโครเมตร ความเร็วของสารป้อนผสมและความดันในระบบมีค่าลดลงตามความสูงของไรเซอร์ และบริเวณด้านล่างของไรเซอร์จะมีสัดส่วนของแข็งมากกว่าด้านบน และเมื่อเพิ่มอัตราการไหลของอากาศ สัดส่วนของแข็งจะมีค่าลดลงแต่ความเร็วของอนุภาค จะมีค่าเพิ่มขึ้นและสัดส่วนของแข็งจะสูงขึ้น เมื่ออัตราการไหลป้อนกลับของของแข็งสูงขึ้น การกระจายตัวของของแข็งตลอดไรเซอร์ของสารป้อนผสมระหว่างทรายกับขี้เลื่อย มีค่าสูงกว่าสารป้อนผสมระหว่างทรายกับแกลบ ที่ตำแหน่งความสูงเดียวกันความเร็วของทราย จะมีค่าต่ำกว่าความเร็วของสารป้อนผสมระหว่างทรายกับชีวมวล และความเร็วของสารป้อนผสมระหว่างทรายกับขี้เลื่อยมีค่าสูงที่สุด An experimental study of hydrodynamics of mixed feed in a circulating fluidized bed was carried out in a cold flow plexiglas reactor. Tests were conducted in a circulating fluidized bed riser having a diameter of 5 cm. and 2.0 m. height and downcomer with a diameter of 0.10 m. and 1.2 m. height. Four solids (sand, sawdust, rice husk and bagasse) were selected in this experiment. The average particle sizes were 250-425 micrometre. The particle densities were of 2312, 1583, 1484 and 630 kg/qb.m., respectively. The effect of air flow rate on particle velocity and pressure in CFB riser were studied. The range of air flow rate was 300-500 l/min. The pressure data obtained from the experiment can be used for determining the voidage in riser column. A CCD camera with Image Pro Plus V4.5.1 program was used to find the particle velocity. It was found that particle velocity and pressure decreased along the riser at constant air flow rate. At the same position, the particle velocity increased with the increasing of air flow rate whereas voidage decreased so that the particle at the lower part was denser than the upper part. It can be seen that an increased solid circulation fluxes results in an increase in the solid holdup. The solid hold up along the riser of sand/saw dust mixer was higher than sand/rice husk mixer, when superficial gas velocity is fixed. In addition, sand velocity was lower than mixer velocity and sand/saw dust mixer velocity was highest 2007-09-13T01:26:51Z 2007-09-13T01:26:51Z 2547 Thesis 9741760388 http://cuir.car.chula.ac.th/handle/123456789/4078 th จุฬาลงกรณ์มหาวิทยาลัย 9666469 bytes application/pdf application/pdf จุฬาลงกรณ์มหาวิทยาลัย
institution Chulalongkorn University
building Chulalongkorn University Library
country Thailand
collection Chulalongkorn University Intellectual Repository
language Thai
topic ฟลูอิไดเซชัน
ชีวมวล
spellingShingle ฟลูอิไดเซชัน
ชีวมวล
สมชาย สวยสอาด, 2522-
อุทกพลศาสตร์ของสารป้อนผสมในเครื่องฟลูอิไดซ์เบดแบบหมุนเวียน
description วิทยานิพนธ์ (วท.ม.)--จุฬาลงกรณ์มหาวิทยาลัย, 2547
author2 สุชญา นิติวัฒนานนท์
author_facet สุชญา นิติวัฒนานนท์
สมชาย สวยสอาด, 2522-
format Theses and Dissertations
author สมชาย สวยสอาด, 2522-
author_sort สมชาย สวยสอาด, 2522-
title อุทกพลศาสตร์ของสารป้อนผสมในเครื่องฟลูอิไดซ์เบดแบบหมุนเวียน
title_short อุทกพลศาสตร์ของสารป้อนผสมในเครื่องฟลูอิไดซ์เบดแบบหมุนเวียน
title_full อุทกพลศาสตร์ของสารป้อนผสมในเครื่องฟลูอิไดซ์เบดแบบหมุนเวียน
title_fullStr อุทกพลศาสตร์ของสารป้อนผสมในเครื่องฟลูอิไดซ์เบดแบบหมุนเวียน
title_full_unstemmed อุทกพลศาสตร์ของสารป้อนผสมในเครื่องฟลูอิไดซ์เบดแบบหมุนเวียน
title_sort อุทกพลศาสตร์ของสารป้อนผสมในเครื่องฟลูอิไดซ์เบดแบบหมุนเวียน
publisher จุฬาลงกรณ์มหาวิทยาลัย
publishDate 2007
url http://cuir.car.chula.ac.th/handle/123456789/4078
_version_ 1681413534800412672