Spray forming of bulk ultrafine-grained Al-Fe-Cr-Ti

Spray forming of bulk ultrafine-grained Al-Fe-Cr-Ti

An Al-2.7Fe-1.9Cr-1.8Ti alloy has been spray formed in bulk and the microstructure and properties compared with those of similar alloys produced by casting, powder aomization (PA), and mechanical alloying (MA) routes. In PA and MA routes, a nanoscale metastable icosahedral phase is usually formed an...

Saved in:

書目詳細資料
Main Authors:	C. Banjongprasert, S. C. Hogg, E. Liotti, C. A. Kirk, S. P. Thompson, J. Mi, P. S. Grant
格式:	雜誌
出版:	2018
主題:	Engineering Materials Science Physics and Astronomy
在線閱讀:	https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=78049427547&origin=inward http://cmuir.cmu.ac.th/jspui/handle/6653943832/50784
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Spray forming of bulk ultrafine-grained Al-Fe-Cr-Ti
由: Banjongprasert C., et al.
出版: (2014)

The influence of post treatments on the microstructure and corrosion behavior of thermally sprayed NiCrMoAl alloy coating
由: P. Daram, et al.
出版: (2020)

Microstructural evolution and nanoindentation of NiCrMoAl alloy coating deposited by arc spraying
由: P. Daram, et al.
出版: (2020)

Fe-Cr/CNTs nanocomposite feedstock powders produced by chemical vapor deposition for thermal spray coatings
由: S. Moonngam, et al.
出版: (2018)

Fe-Cr/CNTs nanocomposite feedstock powders produced by chemical vapor deposition for thermal spray coatings
由: Moonngam S., et al.
出版: (2017)

Twin-coupled shear bands in an ultrafine-grained CoCrFeMnNi high-entropy alloy deformed at 77K
由: Li, Xiyao, et al.
出版: (2022)

Processing and deformation mechanisms of bulk ultrafine grained and nanostructured Mg alloy via mechanical alloying technique
由: CHUA BENG WAH
出版: (2010)

Micro-doping in ultrafine-grained gold bonding wires
由: Chew, Effie Yeong Huey
出版: (2011)

On the occurrence of Portevin-Le Chêtelier instabilities in ultrafine-grained 5083 aluminum alloys
由: Joshi, S.P., et al.
出版: (2014)

Probing the deformation mechanisms of AlCoCrFeNi alloy at various strain rates and grain sizes
由: Tan, Jaz Whee
出版: (2022)

Rate-dependent hardening due to twinning in an ultrafine-grained magnesium alloy
由: Li, B., et al.
出版: (2014)

Glass-forming tendency of bulk La-Al-Ni-Cu-(Co) metallic glass-forming liquids
由: Lu, Z.P., et al.
出版: (2014)

Fabrication and properties of NiCr/CNTs nanocomposite coatings prepared by High Velocity Oxy-Fuel Spraying
由: D. Deesom, et al.
出版: (2018)

Fabrication and properties of NiCr/CNTs nanocomposite coatings prepared by High Velocity Oxy-Fuel Spraying
由: Deesom D., et al.
出版: (2017)

Fabrication and properties of thermal sprayed AlSi-based coatings from nanocomposite powders
由: A. Limpichaipanit, et al.
出版: (2018)

Fabrication and Properties of Thermal Sprayed AlSi-Based Coatings from Nanocomposite Powders
由: Limpichaipanit A., et al.
出版: (2014)

Fabrication and properties of thermal sprayed AlSi-based coatings from nanocomposite powders
由: A. Limpichaipanit, et al.
出版: (2018)

Mechanical behavior of ultrafine-grained materials under combined static and dynamic loadings
由: Guo, Y.Z, et al.
出版: (2020)

Strengthening mechanisms in cryomilled ultrafine-grained aluminum alloy at quasi-static and dynamic rates of loading
由: Cao, B., et al.
出版: (2014)

Effect of short-range ordering and grain boundary segregation on shear deformation of CoCrFeNi high-entropy alloys with Al addition
由: Babicheva, Rita, et al.
出版: (2022)

Dynamic testing at high strain rates of an ultrafine-grained magnesium alloy processed by ECAP
由: Li, B., et al.
出版: (2014)

Deformation behaviour of ultrafine and nanosize-grained Mg alloy synthesized via mechanical alloying
由: Chua, B.W., et al.
出版: (2014)

Glass forming ability of La-Al-Ni-Cu and Pd-Si-Cu bulk metallic glasses
由: Lu, Z.P., et al.
出版: (2014)

Ultrafine BaFe12O19 powder synthesised by mechanochemical processing
由: Ding, J., et al.
出版: (2014)

Grain size effects on softening behavior of bulk nanostructured mechanically milled Mg-5%Al alloy
由: Chua, B.W., et al.
出版: (2014)

Ultrafine magnetic cyanide particles
由: Ng, C.W., et al.
出版: (2014)

Glass forming ability of bulk glass forming alloys
由: Li, Y., et al.
出版: (2014)

Atomic clusters in decagonal Al–Cr–Fe : hexagon, star and decagon
由: Li, Rui Tao, et al.
出版: (2020)

Plasma sprayed functionally graded ZrO2/NiCoCrAlY coatings
由: Gu, Yan Wei.
出版: (2008)

Reduced glass transition temperature and glass forming ability of bulk glass forming alloys
由: Lu, Z.P., et al.
出版: (2014)

PERBANDINGAN MEKANISME DAN LAJU EROSI LAPISAN "HVOF SPRAYED"CR3C2-NICR DAN LAPISAN "WIRE ARC SPRAYED" FE-WC
由: Rakhmad Aryo Baskoro, R

Atomistic insights into the mechanical properties of CoCrFeMnNi alloy at various strain rates and grain sizes
由: Tan, Jason Xin An
出版: (2022)

A new Cu-Hf-Al ternary bulk metallic glass with high glass forming ability and ductility
由: Jia, P., et al.
出版: (2014)

Al-Cr-Fe quasicrystals and their applications as reinforcements in the Ti based metal matrix composites
由: Li, Ruitao
出版: (2015)

Characterization of CrMoBW- Fe base in-flight particles and splats fabricated by nano cored wire arc spraying
由: Man Tuiprae, et al.
出版: (2018)

Characterization of CrMoBW- Fe base in-flight particles and splats fabricated by nano cored wire arc spraying
由: Man Tuiprae, et al.
出版: (2018)

Investigation of thermal sprayed stainless steel/WC-12wt%Co nanocomposite coatings
由: Banjongprasert C., et al.
出版: (2014)

Effect of gamma irradiation and spray drying on properties of ultrafine fully vulcanized powdered rubber (UFPR) as toughening fillers in polymers
由: Rapiphan Taewattana
出版: (2016)

Half-metallic Fe2CrSi and non-magnetic Cu2CrAl Heusler alloys for current-perpendicular-to-plane giant magneto-resistance: First principle and experimental study
由: Ko, V., et al.
出版: (2014)

Post-processing of cold sprayed CoNiCrAlY coatings on Inconel 718 by rapid induction heating
由: Yang, Yongjing, et al.
出版: (2022)