Evolution of throttle-channel dual pores in YSZ ceramic monolith through in situ grown nano carbon wedges

Evolution of throttle-channel dual pores in YSZ ceramic monolith through in situ grown nano carbon wedges

10.1016/j.jeurceramsoc.2012.05.032

Saved in:

書目詳細資料
Main Authors:	Chen, X., Hong, L., Phua, J.Y.R.
其他作者:	CHEMICAL & BIOMOLECULAR ENGINEERING
格式:	Article
出版:	2014
主題:	Grain growth Interfaces Microstructure-final Porosity Sintering
在線閱讀:	http://scholarbank.nus.edu.sg/handle/10635/63882
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Microstructural evolution during sintering of near-monosized agglomerate-free submicron alumina powder compacts
由: Lim, L.C., et al.
出版: (2014)

Investigation of complex additives on the microstructure and properties of low-temperature sintered PZT using the Taguchi method
由: Chua, B.W., et al.
出版: (2014)

Effect of particle size distribution on sintering of agglomerate-free submicron alumina powder compacts
由: Ma, J., et al.
出版: (2014)

Drying of porcine dermal tissue via pressure swing adsorption
由: Chou, S.K., et al.
出版: (2014)

Fabrication of Open-cell Aluminum Foams by Pressure Infiltration and Salt Leaching Method from Commercial Grade Alloys
由: Pat Sooksaen, et al.
出版: (2020)

Development of a novel pressure swing adsorption dehydration system for the preservation of dermal tissue
由: Chou, S.K., et al.
出版: (2014)

One-step sintering process for the production of magnetocaloric La(Fe,Si)₁₃-based composites
由: Zhong, Xi-Chun, et al.
出版: (2023)

Processing and characterization of laser-sintered Al2O 3/ZrO2/SiO2
由: Wang, W., et al.
出版: (2014)

In situ preparation of TiB2 reinforced Al base composite
由: Lu, L., et al.
出版: (2014)

Development of high strength Sn-Cu solder using copper particles at nanolength scale
由: Alam, M.E., et al.
出版: (2014)

Effect of ZrO2 on microstructure and microhardness for laser sintered Al2O3/SiO2/ZrO2
由: Wang, W., et al.
出版: (2016)

Effect of braze flux on direct laser sintering Cu-based metal powder
由: Zhu, H.H., et al.
出版: (2014)

Microstructural evolution in the phase mixtures of Ti(C,N)-Mo at 1600°C
由: Qian, M., et al.
出版: (2014)

Two-stage sintering of nano-sized yttria stabilized zirconia process by powder injection moulding
由: Yu, P.C., et al.
出版: (2014)

Structural and mechanical properties of Al-SiC-ZrO2 nanocomposites fabricated by microwave sintering technique
由: Khan, A., et al.
出版: (2021)

EXAMINING THE INTERACTION EFFECTS OF COMPASSION AND SELF-REGULATORY MODE ON PREFERENCE FOR MULTI-FINAL AND UNI-FINAL CHARITABLE ACTS
由: LIONG JING XIAN
出版: (2022)

Grain Coalescence and Modeling of Nanosized Zirconia in Solid-state Sintering
由: YU POH CHING
出版: (2010)

TO SEND OR NOT TO SEND, THAT IS THE QUESTION: AN EXPLORATORY STUDY ON THE AUGMENTATIVE EFFECTS OF FINALITY ON COPYEDITING
由: TITUS QUEK WEI YANG
出版: (2020)

TOWARDS HIGHER PERFORMANCE LEAD-FREE PIEZOELECTRIC CERAMICS - NEXT GENERATION (BA,CA)(ZR,TI)O3
由: YE SHUKAI
出版: (2012)

Effects of Ca substitution on structure, piezoelectric properties, and relaxor behavior of lead-free Ba(Ti 0.9Zr 0.1)O 3 piezoelectric ceramics
由: Ye, S., et al.
出版: (2014)

Mullite phase formation and reaction sequences with the presence of pentoxides
由: Kong, L.B., et al.
出版: (2014)

Development of magneto-dielectric materials based on Li-ferrite ceramics. I. Densification behavior and microstructure development
由: Teo, M.L.S., et al.
出版: (2014)

Strengthening mechanisms in cryomilled ultrafine-grained aluminum alloy at quasi-static and dynamic rates of loading
由: Cao, B., et al.
出版: (2014)

Towards a homogenized plasticity theory which predicts structural and microstructural size effects
由: Poh, L.H., et al.
出版: (2014)

Homogenization towards a grain-size dependent plasticity theory for single slip
由: Poh, L.H., et al.
出版: (2014)

Synthesis and characterization of nano boron nitride reinforced magnesium composites produced by the microwave sintering method
由: Seetharaman, S., et al.
出版: (2014)

Magnetic properties of isolated FePt-C nanocomposited films
由: Jiang, C., et al.
出版: (2014)

Development of high performance Mg-Al 2O 3 composites containing Al 2O 3 in submicron length scale using microwave assisted rapid sintering
由: Wong, W.L.E., et al.
出版: (2014)

Synthesis and characterization of hybrid composite aerogels from alginic acid and graphene oxide
由: Co, C. J. U., et al.
出版: (2017)

Rate-dependent hardening due to twinning in an ultrafine-grained magnesium alloy
由: Li, B., et al.
出版: (2014)

Reduction in grain size of doped PZT ceramics for miniature sensors and actuators by ball milling technique
由: Lu, L., et al.
出版: (2014)

Effect of Mn addition on the densification, grain growth and ionic conductivity of pure and SiO2-containing 8YSZ electrolytes
由: Zhang, T.S., et al.
出版: (2014)

Effect of SLS process parameters on sintering quality for composite Al2O3/ZrO2/SiO2
由: Wang, W., et al.
出版: (2014)

Microstructure and compressive behavior of Al–Y2O3 nanocomposites prepared by microwave-assisted mechanical alloying
由: Mattli, M.R., et al.
出版: (2021)

In-situ formation of copper matrix composites by laser sintering
由: Leong, C.C., et al.
出版: (2014)

Effect of pore sizes and cholesterol-lipid solution on the fracture toughness of pure titanium sintered compacts
由: Teoh, S.H., et al.
出版: (2014)

Synthesis and characterization of bulk nanostructured copper for nano wafer level packaging
由: PAN MANYI
出版: (2010)

Sintering and oxidation using a novel ultrahigh vacuum transmission electron microscope with in situ magnetron sputtering
由: Yeadon, M., et al.
出版: (2014)

Effects of metals on the nitridation of silicon and mechanical properties of silicon nitride products
由: Tananya Vongthavorn
出版: (2009)

Effects of metals on the nitridation of silicon and mechanical properties of silicon nitride products
由: Tananya Vongthavorn
出版: (2003)