Tool wear characteristics of binderless CBN tools used in high-speed milling of titanium alloys

Tool wear characteristics of binderless CBN tools used in high-speed milling of titanium alloys

10.1016/j.wear.2004.09.066

Saved in:

書目詳細資料
Main Authors:	Wang, Z.G., Rahman, M., Wong, Y.S.
其他作者:	MECHANICAL ENGINEERING
格式:	Article
出版:	2014
主題:	High-speed milling Titanium alloy Tool life Tool wear
在線閱讀:	http://scholarbank.nus.edu.sg/handle/10635/61591
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

High-speed milling of titanium alloys using binderless CBN tools
由: Wang, Z.G., et al.
出版: (2014)

An overview of high-speed machining of titanium alloys
由: Rahman, M., et al.
出版: (2014)

A review on high-speed machining of titanium alloys
由: Rahman, M., et al.
出版: (2014)

High speed machining of aerospace alloy Ti-6Al-4V
由: Zareena, A.R., et al.
出版: (2014)

Effects of cooling supply strategies and cutting conditions on tool life in end milling titanium alloy
由: Rahman, M., et al.
出版: (2014)

Effects of coolant supply methods and cutting conditions on tool life in end milling titanium alloy
由: Sun, J., et al.
出版: (2014)

CBN tool wear in ductile cutting of tungsten carbide
由: Liu, K., et al.
出版: (2014)

A comparative study of feature selection for hidden Markov model-based micro-milling tool wear monitoring
由: Zhu, K.P., et al.
出版: (2014)

Experimental Modelling of Cutting Forces as a Function of Tool Wear in End Milling
由: Ong, P.K.L., et al.
出版: (2014)

Tool Condition Monitoring for Ball Nose Milling - A Model Based Approach
由: KOMMISETTI VENKATA RAMA SUBRAHMANYAM
出版: (2010)

The effects of machining conditions on the flank wear of tin-coated high speed steel tool inserts
由: Lim, S.C., et al.
出版: (2014)

Multi-category micro-milling tool wear monitoring with continuous hidden Markov models
由: Zhu, K., et al.
出版: (2014)

Multi-categories tool wear classification in micro-milling
由: ZHU KUNPENG
出版: (2010)

High-speed milling of titanium alloys: Modeling and optimization
由: WANG ZHIGANG
出版: (2010)

Tool wear detection and fault diagnosis based on cutting force monitoring
由: Huang, S.N., et al.
出版: (2014)

Performance of CBN cutting tools in facing of age hardened inconel 718
由: Arunachalam, R.M., et al.
出版: (2014)

Transitions in wear mechanisms of alumina cutting tools
由: Goh, G.K.L., et al.
出版: (2014)

Machinability of titanium alloys
由: Rahman, M., et al.
出版: (2014)

Effective use of coated tools - The wear-map approach
由: Lim, S.C., et al.
出版: (2014)

Bayesian-inference-based neural networks for tool wear estimation
由: Dong, J., et al.
出版: (2014)

Flank wear measurement by a threshold independent method with sub-pixel accuracy
由: Wang, W.H., et al.
出版: (2014)

Binderless CBN tools, a breakthrough for machining titanium alloys
由: Zareena, A.R., et al.
出版: (2014)

Tool condition monitoring using laser scatter pattern
由: Wong, Y.S., et al.
出版: (2014)

Wear of TiC-coated carbide tools in dry turning
由: Lim, C.Y.H., et al.
出版: (2014)

Model-based Tool Condition Monitoring for Ball-nose End Milling
由: HUANG SHENG
出版: (2013)

Performance evaluation of pure CBN tools for machining of steel
由: Neo, K.S., et al.
出版: (2014)

A study on ultrasonic vibration cutting of low alloy steel
由: Nath, C., et al.
出版: (2014)

Cutting edge controlled wear of alumina inserts
由: MD NAZMUL HAQUE
出版: (2010)

Effective application of neural networks in tool condition identification
由: Sun, J., et al.
出版: (2014)

Cutting force control of milling machine
由: Huang, S., et al.
出版: (2014)

The behaviour of static torque and thrust due to tool wear in drilling
由: Mannan, M.A., et al.
出版: (2014)

Tool wear characteristics and their effects on nanoscale ductile mode cutting of silicon wafer
由: Li, X.P., et al.
出版: (2014)

Effect of crystallographic orientation on wear of diamond tools in nanoscale ductile cutting of silicon
由: MOHAMMAD SHARIF UDDIN
出版: (2010)

The effects of work material on tool wear
由: Lim, C.Y.H., et al.
出版: (2014)

Surface texture indicators of tool wear - a machine vision approach
由: Bradley, C., et al.
出版: (2014)

Multiclassification of tool wear with support vector machine by manufacturing loss consideration
由: Sun, J., et al.
出版: (2014)

Tool wear monitoring using a fast Hough transform of images of machined surfaces
由: Mannan, M.A., et al.
出版: (2014)

Effect of grain size on wear behaviour of alumina cutting tools
由: Goh, G.K.L., et al.
出版: (2014)

Intelligent tool wear identification based on optical scattering image and hybrid artificial intelligence techniques
由: Li, X.Q., et al.
出版: (2014)

Model for predicting tool life in micro milling of copper
由: Prakash, J.R.S., et al.
出版: (2014)