Processing-microstructure-mechanical properties of Al based metal matrix composites synthesized using casting route

Processing-microstructure-mechanical properties of Al based metal matrix composites synthesized using casting route

Key Engineering Materials

Saved in:

書目詳細資料
Main Authors:	Gupta, M., Surappa, M.K.
其他作者:	MECHANICAL & PRODUCTION ENGINEERING
格式:	Article
出版:	2014
在線閱讀:	http://scholarbank.nus.edu.sg/handle/10635/58643
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!
機構:	National University of Singapore

相似書籍

Effect of microstructural features on the ageing behaviour of Al-Cu/SiC metal matrix composites processed using casting and rheocasting routes
由: Gupta, M., et al.
出版: (2014)

Processing-microstructure-mechanical properties of an Al-Cu/SiC metal matrix composite synthesized using disintegrated melt deposition technique
由: Gupta, M., et al.
出版: (2014)

Processing-microstructure-mechanical properties of an Al-Cu/SiC metal matrix composite synthesized using disintegrated melt deposition technique
由: Gupta, M., et al.
出版: (2014)

Effect of interfacial characteristics on the failure-mechanism mode of a SiC reinforced Al based metal-matrix composite
由: Gupta, M., et al.
出版: (2014)

Effects of type of processing on the microstructural features and mechanical properties of AlCu/SiC metal matrix composites
由: Gupta, M., et al.
出版: (2014)

Effect of matrix constitution on microstructure and mechanical properties of rheocast metal matrix composites
由: Wong, C.W., et al.
出版: (2014)

Effect of type of processing on the microstructural features and mechanical properties of a SiC reinforced Al-Cu metal matrix composite
由: Gupta, M., et al.
出版: (2014)

Processing, microstructure, and mechanical properties of (Al-Cu)/C composites synthesised using partial liquid phase casting process
由: Gupta, M., et al.
出版: (2014)

Microwave rapid sintering of al-metal matrix composites: A review on the effect of reinforcements, microstructure and mechanical properties
由: Penchal Reddy, M, et al.
出版: (2020)

PROCESSING, MICROSTRUCTURE AND MECHANICAL PROPERTIES OF ALUMINUM BASED METAL MATRIX COMPOSITES
由: REN LIPING
出版: (2020)

MICROSTRUCTURE AND MECHANICAL PROPERTIES OF HYPOEUTECTIC AND HYPEREUTECTIC AL-SI CAST ALLOYS (AS CAST)
由: Kamila Raihan, Ariska

Effect of variation in physical properties of the metallic matrix on the microstructural characteristics and the ageing behaviour of Al-Cu/SiC metal matrix composites
由: Wong, C.W., et al.
出版: (2014)

Effect of increase in heterogeneous nucleation sites on the aging behavior of 6061/SiC metal matrix composites
由: Gupta, M., et al.
出版: (2014)

Regarding the effect of aging heat treatment on the failure behaviour of a SiC reinforced Al based metal matrix composite
由: Gupta, M., et al.
出版: (2014)

Effect of weight percentage of SiC particulates on the ageing behaviour of 6061/SiC metal matrix composites
由: Gupta, M., et al.
出版: (2014)

Microstructure and mechanical properties of fiber reinforced magnesium based composites fabricated using conventional casting
由: Ganesh, V.V., et al.
出版: (2014)

Effect of type of processing on the micro structural features and mechanical properties of Al-Cu/SiC metal matrix composites
由: Gupta, M., et al.
出版: (2014)

Microstructure and Mechanical Properties of a Mg-5Al Alloy Synthesized by Mechanical Alloying
由: Gao, X., et al.
出版: (2014)

Effect of particulate type on the microstructure and heat-treatment response of Al-Cu-based metal-matrix composites
由: Gupta, M., et al.
出版: (2014)

Enhanced mechanical properties of an Al based metal matrix composite prepared using mechanical alloying
由: Lu, L., et al.
出版: (2014)

Friction and wear characteristics of Al-Cu/C composites synthesized using partial liquid phase casting process
由: Lim, S.C., et al.
出版: (2014)

Microstructure and mechanical properties of Mg-based composites synthesized using a novel mechanical disintegration and deposition technique
由: Oo, M.K.Khaing, et al.
出版: (2014)

Processing, microstructure, and properties of Mg - SiC composites synthesised using fluxless casting process
由: Lim, S.C.V., et al.
出版: (2014)

In situ stir cast Al-TiB2 composite: Processing and mechanical properties
由: Tee, K.L., et al.
出版: (2014)

Micromechanical modeling of processing-induced damage in Al-SiC metal matrix composites synthesized using the disintegrated melt deposition technique
由: Tham, L.M., et al.
出版: (2014)

Machinability of cast/hip-ed metal matrix composites
由: Hung, Nguyen Phu, et al.
出版: (2008)

Solidification processed Mg/Al bimetal macrocomposite: Microstructure and mechanical properties
由: Paramsothy, M., et al.
出版: (2014)

Microstructure and mechanical properties of hypo/hyper-eutectic Al-Si alloys synthesized using a near-net shape forming technique
由: Gupta, M., et al.
出版: (2014)

STRUCTURE AND PROPERTIES OF AL-BASED METAL MATRIX COMPOSITES
由: SU LING
出版: (2020)

Effects of T6 age hardening on microstructure and mechanical properties of Al-Si-Cu cast aluminium alloy
由: Amporn Wiengmoon, et al.
出版: (2018)

Effects of T6 age hardening on microstructure and mechanical properties of Al-Si-Cu cast aluminium alloy
由: Amporn Wiengmoon, et al.
出版: (2018)

Microstructure and growth mechanism of Al2O3/Al ceramic matrix composite made by directed oxidation of Al alloys
由: Qin, C.-D., et al.
出版: (2014)

RESEACH ON MECHANICAL PROPERTIES OF METAL MATRIX COMPOSITES
由: LI GANG
出版: (2020)

Microstructure and grain growth behavior of an aluminum alloy metal matrix composite processed by disintegrated melt deposition
由: Gupta, M., et al.
出版: (2014)

In-situ stir cast Al-TiB2 composite: Matrix modification
由: Tee, K.L., et al.
出版: (2014)

Selective laser melting of reduced graphene oxide/S136 metal matrix composites with tailored microstructures and mechanical properties
由: Wen, Shifeng, et al.
出版: (2019)

Synthesis of in situ Al-TiB2 composites using stir cast route
由: Tee, K.L., et al.
出版: (2014)

MANUFACTURE OF MOTOR CYCLE CYLINDER LINER FROM METAL MATRIX COMPOSITES AL-SIC USING STIR CASTING METHOD
由: Ridwan Hamzah, Muhamad

Microstructure and mechanical properties of elemental and reinforced magnesium synthesized using a fluxless liquid-phase process
由: Gupta, M., et al.
出版: (2014)

Metal matrix composites
由: Gupta, M
出版: (2020)