EFFECTS OF PRESTRAIN WITH STRAIN GRADIENT PRESENT ON SHEET METAL FORMABILITY.

EFFECTS OF PRESTRAIN WITH STRAIN GRADIENT PRESENT ON SHEET METAL FORMABILITY.

Journal of Engineering Materials and Technology, Transactions of the ASME

Saved in:

書目詳細資料
Main Authors:	Shang, H.M., Tan, G.S., Tan, W.C.M.
其他作者:	MECHANICAL & PRODUCTION ENGINEERING
格式:	Article
出版:	2014
在線閱讀:	http://scholarbank.nus.edu.sg/handle/10635/58233
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!
機構:	National University of Singapore

相似書籍

FORMABILITY OF SHEET-METAL UNDER LATERAL PRESSURE
由: VICTOR SHIM PHYAU WUI
出版: (2019)

Optimization of the formability of knitted fabric composite sheet by means of combined deep drawing and stretch forming
由: Lim, T.C., et al.
出版: (2014)

Assessment of the formability of a low-carbon steel sheet
由: Chen, Lixin
出版: (1996)

Investigation of thin sheet formability (copper) during laser shock forming
由: Nurul Farhana Abdul Rahman.
出版: (2012)

Experimental investigation of thin sheet formability during laser shock forming
由: Dong, Anna Siling
出版: (2013)

Determination of stress-strain relationship of sheet metal under biaxial tension
由: Tay, C.J., et al.
出版: (2014)

Prestrain Programmable 4D Printing of Nanoceramic Composites with Bioinspired Microstructure
由: Li, T, et al.
出版: (2023)

องค์ประกอบของเครื่องหมายโปรตีนที่ติดสี (Prestrained Protein Marker)
由: พิมพ์ใจ ใจเย็น
出版: (2019)

Stretching during axisymmetrical forming of sheet metal
由: Qin, S., et al.
出版: (2014)

Strain field of deep drawn knitted fabric reinforced thermoplastic composite sheets
由: Lim, T.C., et al.
出版: (2014)

Hydroforming sheet metal with intermittent changes in the draw-in condition of the flange
由: Shang, H.M., et al.
出版: (2014)

ASSESSMENT OF BEHAVIOUR OF SHEET METAL DURING HYDROFORMING.
由: Shang, H.M., et al.
出版: (2014)

FORMABILITY OF LAMINATED THERMOPLASTIC CFRP AT HIGH TEMPERATURE
由: IMADUDDIN

HYDROFORMING SHEET METAL INTO AXISYMMETRICAL SHELLS WITH DRAW-IN OF FLANGE PERMITTED.
由: Shang, H.M., et al.
出版: (2014)

HYDROFORMING SHEET METAL INTO AXISYMMETRICAL SHELLS WITH DRAW-IN OF FLANGE PERMITTED.
由: Shang, H.M., et al.
出版: (2014)

Glass formability and structural stability of Al-based alloy systems
由: Yang, H.W., et al.
出版: (2014)

Combined effect of drawing and stretching in axisymmetrical sheet forming
由: Shang, H.M., et al.
出版: (2014)

Formability of Limited Thermoplastic CFRP Plate & the Residual Strength
由: IBRAHIM JENIE, YAZDI

Muscle-inspired formable wood-based phase change materials
由: Liu, Yifan, et al.
出版: (2024)

ANALYSIS OF FORMABILITY AND BENDING STRENGTH OF RECTANGULAR COMPOSITE STRUCTURES OF RAMIE\/HDPE THERMOPLASTIC
由: RIZQILLA REKSOPRODJO, AGHA

ANALISIS FORMABILITY DAN KEKUATAN LENTUR STRUKTUR KOMPOSIT THERMOPLASTICRAMIE/HDPE BERPENAMPANG RECTANGULAR
由: Rizqilla Reksoprodjo, Agha

Analytical modelling for sheet thermoforming of knitted fabric reinforced PMC
由: Lim, T.C., et al.
出版: (2014)

Sheet forming kinematics of curved-textile composites by the mapping scheme
由: Lim, T.C., et al.
出版: (2014)

C0 solid elements for materials with strain gradient effects
由: Swaddiwudhipong, S., et al.
出版: (2014)

Laser forming of metal sheets
由: Wong, Zi Hao
出版: (2014)

FABRICATION OF SANSEVIERIA TRIFASCIATA FIBER REINFORCED POLYLACTIC ACID (PLA) COMPOSITE FILAMENT: OPTIMIZATION OF FORMABILITY
由: Ariella Eko Putra, Dhani

CORRELATION OF CELLULOSE POLYMER CHAIN ARRANGEMENT TO SHRINKAGE PHENOMENON AND FORMABILITY OF LUFFA CYLINDRICA CELLULOSE PLASTICS
由: Melvin, Theodorus

Formability of intermediate compounds in oxide systems of M2O3-M2O3 type
由: Zhu, W., et al.
出版: (2014)

Effect of stress/strain partition on the mechanical behavior of heterostructured laminates: a strain gradient plasticity modeling
由: Lu, Xiaochong, et al.
出版: (2024)

THE EFFECT OF MECHANICAL PROPERTIES AND MICROSTRUCTURAL CHARACTERISTICS ON STRETCH-EDGE FORMABILITY OF DUAL PHASE ADVANCED HIGH STRENGTH STEEL: COMPREHENSIVE REVIEW
由: FATKHUROZAK

Axisymmetric sheet forming of knitted fabric composite by combined stretch forming and deep drawing
由: Lim, T.C., et al.
出版: (2014)

Design methodology for sheet metal parts
由: Sng, Wei Kang.
出版: (2008)

Sheet forming simulation of knitted fabric composites considering fabric reorientation
由: Lim, T.C., et al.
出版: (2014)

Knitted fabric composite sheet forming simulation considering fabric realignment
由: Lim, T.C., et al.
出版: (2014)

Numerical investigation of micro-scale sheet metal bending using laser beam scanning
由: Tan, X.M., et al.
出版: (2014)

Optimising process parameters and toolpath strategies for sheet metal flanging in incremental sheet forming
由: Kiera, Kathleen
出版: (2024)

Cleavage fracture assessment incorporating strain gradient plasticity
由: ZHANG SUFEN
出版: (2012)

THREE POINT BENDING FLEXURAL STRENGTH OF RAMI FIBRE COMPOSITE WITH HDPE MATRIX AND ITS FORMABILITY INTO BRACE SCOLIOSIS
由: TRIMARYONO, MUH

Metal forming with flexible tools for sheet metal and tubular products
由: Thiruvarudchelvan, Sinnathamby., et al.
出版: (2008)

Half-metallicity in organic single porous sheets
由: Kan, Erjun, et al.
出版: (2013)