Revealing the WEDM process parameters for the machining of pure and heat-treated titanium (Ti-6Al-4V) alloy

Revealing the WEDM process parameters for the machining of pure and heat-treated titanium (Ti-6Al-4V) alloy

10.3390/ma14092292

Saved in:

書目詳細資料
Main Authors:	Gupta, Nitin Kumar, Somani, Nalin, Prakash, Chander, Singh, Ranjit, Walia, Arminder Singh, Singh, Sunpreet, Pruncu, Catalin Iulian
其他作者:	MECHANICAL ENGINEERING
格式:	Article
出版:	MDPI AG 2022
主題:	Cutting speed Material removal rate Surface roughness Titanium alloy WEDM
在線閱讀:	https://scholarbank.nus.edu.sg/handle/10635/232477
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

An overview of high-speed machining of titanium alloys
由: Rahman, M., et al.
出版: (2014)

A review on high-speed machining of titanium alloys
由: Rahman, M., et al.
出版: (2014)

Design, Development and Study of Optimal Parameters of a Micro Wire Electrical Discharge Machining (WEDM) Device
由: SADIQ MOHAMMAD ALAM
出版: (2010)

High-speed milling of titanium alloys: Modeling and optimization
由: WANG ZHIGANG
出版: (2010)

Experimental investigation into nano-finishing of β-TNTZ alloy using magnetorheological fluid magnetic abrasive finishing process for orthopedic applications
由: Prakash, Chander, et al.
出版: (2022)

Multi-Objective Optimization of WEDM of Aluminum Hybrid Composites Using AHP and Genetic Algorithm
由: Kumar, Amresh, et al.
出版: (2022)

High-speed milling of titanium alloys using binderless CBN tools
由: Wang, Z.G., et al.
出版: (2014)

Tool wear characteristics of binderless CBN tools used in high-speed milling of titanium alloys
由: Wang, Z.G., et al.
出版: (2014)

High speed machining of aerospace alloy Ti-6Al-4V
由: Zareena, A.R., et al.
出版: (2014)

On investigating the soda-lime shot blasting of AZ31 alloy: Effects on surface roughness, material removal rate, corrosion resistance, and bioactivity
由: Singh, G., et al.
出版: (2021)

Tension-compression asymmetry and shear strength of titanium alloys
由: Suryawanshi, J., et al.
出版: (2022)

An investigation of cutting forces and surface damage in high-speed turning of Inconel 718
由: Pawade, R.S., et al.
出版: (2014)

Magneto-rheological fluid assisted abrasive nanofinishing of ?-phase ti-nb-ta-zr alloy: Parametric appraisal and corrosion analysis
由: Singh, S., et al.
出版: (2021)

Experimental evaluation on the effect of minimal quantities of lubricant in milling
由: Rahman, M., et al.
出版: (2014)

Effects of coolant supply methods and cutting conditions on tool life in end milling titanium alloy
由: Sun, J., et al.
出版: (2014)

Investigating the influence of wedm process parameters in machining of hybrid aluminum composites
由: Kumar, A., et al.
出版: (2021)

MACHINING OF ADVANCED FIBER REINFORCED POLYMER
由: JOSEPH RAJ SAHAYA PRAKASH
出版: (2020)

Evaluation of ultrasonic vibration cutting while machining inconel 718
由: Nath, C., et al.
出版: (2014)

Cutting edge controlled wear of alumina inserts
由: MD NAZMUL HAQUE
出版: (2010)

Characteristics of high speed micro-cutting of tungsten carbide
由: Liu, K., et al.
出版: (2014)

Effect of machining parameters in ultrasonic vibration cutting
由: Nath, C., et al.
出版: (2014)

Bacterial adhesion and osteoblast function on titanium with surface-grafted chitosan and immobilized RGD peptide
由: Shi, Z., et al.
出版: (2014)

Experimental investigation on the factors affecting the quality of titanium alloy overhang via selective laser melting forming
由: Su, Chunjian, et al.
出版: (2023)

A comparative analysis of laser additive manufacturing of high layer thickness pure Ti and inconel 718 alloy materials using finite element method
由: Singh, Sapam Ningthemba, et al.
出版: (2022)

Improvement on mechanical properties and corrosion resistance of titanium-tantalum alloys in-situ fabricated via selective laser melting
由: Zhao, Danlei, et al.
出版: (2020)

Machinability of titanium alloys
由: Rahman, M., et al.
出版: (2014)

Modeling of the effect of tool edge radius on surface generation in elliptical vibration cutting
由: Zhang, X., et al.
出版: (2014)

Visualizing powder de-agglomeration upon impact with simultaneous flowing charge behaviour
由: Kwek, J.W., et al.
出版: (2014)

High speed imaging with electrostatic charge monitoring to track powder deagglomeration upon impact
由: Kwek, J.W., et al.
出版: (2014)

Micro milling of pure copper
由: Rahman, M., et al.
出版: (2014)

Effects of cooling supply strategies and cutting conditions on tool life in end milling titanium alloy
由: Rahman, M., et al.
出版: (2014)

Bone response to unloaded titanium implants in the fibula, iliac crest, and scapula: An animal study in the Yorkshire pig
由: Rohner, D., et al.
出版: (2014)

Microstructural optimization through heat treatment for enhancing the fracture toughness and fatigue crack growth resistance of selective laser melted Ti–6Al–4V alloy
由: Kumar, Punit, et al.
出版: (2021)

Evaluation of minimal quantities of lubricant in end milling
由: Rahman, M., et al.
出版: (2014)

Synthesis of nanostructured titanium based intermetallics by mechanical alloying
由: ZHANG FAN
出版: (2010)

Surface characteristics of machined polystyrene with 3D printed thermoplastic tool
由: Sandhu, K., et al.
出版: (2021)

Effect of pore sizes and cholesterol-lipid solution on the fracture toughness of pure titanium sintered compacts
由: Teoh, S.H., et al.
出版: (2014)

Comparative fatigue analysis of wrought and laser powder bed fused Ti-6Al-4V for aerospace repairs: academic and industrial insights
由: Nagalingam, Arun Prasanth, et al.
出版: (2023)

Vibration exposure and transmissibility on dentist’s anatomy: A study of micro motors and air-turbines
由: Banga, Harish Kumar, et al.
出版: (2022)

GRAPHENE NANOCOATING RENDERS PERSISTENT CORROSION PROTECTION TO TITANIUM BIOMEDICAL ALLOYS
由: RITIKA MALHOTRA
出版: (2021)