Introducing a High Performance Mg-Based Multicomponent Alloy as an Alternative to Al-Alloys

Introducing a High Performance Mg-Based Multicomponent Alloy as an Alternative to Al-Alloys

10.3389/fmats.2019.00215

Saved in:

書目詳細資料
Main Authors:	Tun, K.S., Kumar, A., Gupta, M.
其他作者:	MECHANICAL ENGINEERING
格式:	Article
出版:	Frontiers Media S.A. 2021
主題:	magnesium mechanical properties microstructure multicomponent alloy yield asymmetry
在線閱讀:	https://scholarbank.nus.edu.sg/handle/10635/211663
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!
機構:	National University of Singapore

相似書籍

Fabrication and Microstructure of Mechanically Alloyed Mg-Al-Nd Alloys
由: Yan, C., et al.
出版: (2014)

Mechanical characterization of graphene nanoplateletsreinforced mg-3sn alloy synthesized by powder metallurgy
由: Kumar, Pravir, et al.
出版: (2022)

Feasibility study on utilizing carbon dioxide during the processing of Mg-Al alloys
由: Subramanian, J., et al.
出版: (2014)

Synthesis and mechanical properties of nanostructured Mg-Al-Nd alloys
由: Yan, C., et al.
出版: (2014)

Microstructure and Mechanical Properties of a Mg-5Al Alloy Synthesized by Mechanical Alloying
由: Gao, X., et al.
出版: (2014)

The Origin of High Strength and High Ductility in Nanostructured Mg-5%Al-x%Nd Alloys
由: Lu, L., et al.
出版: (2014)

Structural, physical and mechanical properties of Mg-Al alloys processed under CO 2 atmosphere
由: Jayalakshmi, S., et al.
出版: (2014)

Effect of Ag and Cu trace additions on the microstructural evolution and mechanical properties of Mg-5Sn alloy
由: Jayalakshmi, S., et al.
出版: (2014)

Carbon nanotube addition to concentrated magnesium alloy AZ81: Enhanced ductility with occasional significant increase in strength
由: Paramsothy, M., et al.
出版: (2014)

Microstructure and mechanical properties of Mg-Al alloys with in situ Al4C3 phase synthesised by CO2 incorporation during liquid state processing
由: Jayalakshmi, S., et al.
出版: (2014)

The mechanical behavior of magnesium alloy AZ91 reinforced with fine copper particulates
由: Ho, K.F., et al.
出版: (2014)

Microstructure and mechanical behavior of laser aided additive manufactured low carbon interstitial Fe₄₉.₅Mn₃₀Co₁₀Cr₁₀C₀.₅ multicomponent alloy
由: Chew, Youxiang, et al.
出版: (2022)

Wear of Mg-5%Al-5%Nd alloy with nanocrystalline grain size
由: Lim, C.Y.H., et al.
出版: (2014)

Enhancing tensile/compressive response of magnesium alloy AZ31 by integrating with Al2O3 nanoparticles
由: Paramsothy, M., et al.
出版: (2014)

Processing, microstructure, and properties of a Mg/Al bimetal macrocomposite
由: Paramsothy, M., et al.
出版: (2014)

Development of Nano-composites Based on Magnesium Alloys System AZ31B
由: NGUYEN QUY BAU
出版: (2010)

Creation of high performance Mg based composite containing nano-size Al 2O 3 particulates as reinforcement
由: Hassan, S.F., et al.
出版: (2014)

Microstructural and mechanical properties of AZ31 magnesium alloy with Cr addition and CO 2 incorporation during processing
由: Jayalakshmi, S., et al.
出版: (2014)

Structure and properties of Mg-Al-Ti-B alloys synthesized via mechanical alloying
由: Lu, L., et al.
出版: (2014)

Nanostructured Mg-5%Al-x%Nd alloys
由: Lu, L., et al.
出版: (2014)

Influence of Overlapping Tracks on Microstructure Evolution and Corrosion Behavior in Laser-melt Magnesium Alloy
由: Guan, Ying Chun, et al.
出版: (2016)

Effect of length scale of Al2O3 particulates on microstructural and tensile properties of elemental Mg
由: Hassan, S.F., et al.
出版: (2014)

Effect of nano-alumina and copper micron size particulates on microstructure and mechanical properties of magnesium alloy AZ31
由: Nguyen, Q.B., et al.
出版: (2014)

Effect of Mg/nano-Al2O3 interaction time during stirring on microstructure and mechanical properties of Mg-Al2O 3 composite
由: Shanthi, M., et al.
出版: (2014)

Simultaneous effect of nano-Al 2O 3 and micrometre Cu particulates on microstructure and mechanical properties of magnesium alloy AZ31
由: Nguyen, Q.B., et al.
出版: (2014)

Effect of particulate size of Al2O3 reinforcement on microstructure and mechanical behavior of solidification processed elemental Mg
由: Hassan, S.F., et al.
出版: (2014)

Effect of addition of nano-al2o3 and copper particulates and heat treatment on the tensile response of az61 magnesium alloy
由: Nguyen, Q.B., et al.
出版: (2014)

Mechanical properties of nanocrystalline Mg-Al-Ti alloys
由: Thein, M.A., et al.
出版: (2014)

DEVELOPMENT OF HIGH-PERFORMANCE QUATERNARY Mg-Y-Zn-Al ALLOYS AND NANOCOMPOSITES FOR LIGHTWEIGHTING APPLICATIONS IN ST KINETICS LAND SYSTEMS
由: TAN XINGHE
出版: (2017)

Effect of graphenenano-platelets on the mechanical properties of Mg/3wt%Al alloy-nanocomposite
由: Kumar P., et al.
出版: (2020)

Nanoparticle addition to enhance the mechanical response of magnesium alloys including nanoscale deformation mechanisms
由: Paramsothy, M., et al.
出版: (2014)

Effect of Deformation and Temperature Paths in Severe Plastic Deformation Using Groove Pressing on Microstructure, Texture, and Mechanical Properties of AZ31-O
由: Fong, Kai Soon, et al.
出版: (2016)

Development of novel lightweight metastable metal-(metal + ceramic) composites using a new powder metallurgy approach
由: Tun, K.S., et al.
出版: (2021)

Development from alloys to nanocomposite for an enhanced mechanical and ignition response in magnesium
由: Tun, Khin Sandar, et al.
出版: (2022)

Fabrication and characteristics of magnesium alloys produced via powder metallurgy
由: Cao, P., et al.
出版: (2014)

Grain size dependent tensile behavior of Mg-3%Al alloy at elevated temperatures
由: Mallick, A., et al.
出版: (2014)

MEDIUM AND HIGH ENTROPY ALLOYS: DESIGN AND ADDITIVE MANUFACTURING
由: MEHMET CAGIRICI
出版: (2021)

Enhancing corrosion resistance of Mg alloy AZ31B in NaCl solution using alumina reinforcement at nanolength scale
由: Kukreja, M., et al.
出版: (2014)

Corrosion behavior, microstructure and mechanical properties of novel mg-zn-ca-er alloy for bio-medical applications
由: Panemangalore, Devadas Bhat, et al.
出版: (2022)

Development from alloys to nanocomposite for an enhanced mechanical and ignition response in magnesium
由: Tun, Khin Sandar, et al.
出版: (2022)