Removability of 316L stainless steel cone and block support structures fabricated by Selective Laser Melting (SLM)

Removability of 316L stainless steel cone and block support structures fabricated by Selective Laser Melting (SLM)

10.1016/j.matdes.2020.108691

Saved in:

書目詳細資料
Main Authors:	Cao, Q, Bai, Y, Zhang, J, Shi, Z, Fuh, JYH, Wang, H
其他作者:	ELECTRICAL AND COMPUTER ENGINEERING
格式:	Article
出版:	Elsevier 2020
在線閱讀:	https://scholarbank.nus.edu.sg/handle/10635/168539
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

A novel method to improve the removability of cone support structures in selective laser melting of 316L stainless steel
由: Cao, Qiqiang, et al.
出版: (2021)

Dry mechanical-electrochemical polishing of selective laser melted 316L stainless steel
由: Bai, Y, et al.
出版: (2020)

Development of 316L and 316L-1.0Y2O3 ODS steel fabricated by selective laser melting (SLM)
由: Zhou, Chong
出版: (2019)

Characterization of carbide particle-reinforced 316L stainless steel fabricated by selective laser melting
由: Bhowmik, Ayan, et al.
出版: (2022)

EBSD characterization of selected laser melted 316L stainless steel
由: Muhammad Shafiq Omar
出版: (2022)

Surface quality and material removal in magnetic abrasive finishing of selective laser melted 316L stainless steel
由: Zhang, J., et al.
出版: (2020)

Review Of The Fatigue Performance Of Stainless Steel 316L Parts Manufactured By Selective Laser Melting
由: Zhang, Meng, et al.
出版: (2016)

Selective laser melting of stainless steel 316L with low porosity and high build rates
由: Sun, Zhongji, et al.
出版: (2016)

Selective laser melting of 316L stainless steel/ TiC metal matrix composite
由: Ho, Zi Liang
出版: (2020)

Influence of scanning strategy and building direction on microstructure and corrosion behaviour of selective laser melted 316L stainless steel
由: Zhao, Cuiling, et al.
出版: (2022)

Selective laser melting of 316L stainless steel/ TiB2 metal matrix composite
由: Ng, Yek Khee
出版: (2020)

316L stainless steel manufactured by selective laser melting and its biocompatibility with or without hydroxyapatite coating
由: Luo, J., et al.
出版: (2022)

Multi-layer 2D grain structure simulation in selective laser melting of stainless steel 316L
由: Yeong, Wai Yee, et al.
出版: (2018)

Recrystallization-based grain boundary engineering of 316L stainless steel produced via selective laser melting
由: Gao, Shubo, et al.
出版: (2022)

Effects of process parameters on mechanical properties of micro selective laser melting- printed 316L stainless steel
由: Lee, Joseph Zhi Wei
出版: (2019)

Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting
由: Sun, Zhongji, et al.
出版: (2018)

Influence of laser beam diameter on the mechanical properties of selective laser melted 316L stainless steel and pure nickel parts
由: Yan, Jiwei
出版: (2021)

Dual interfacial characterization and property in multi-material selective laser melting of 316L stainless steel and C52400 copper alloy
由: Bai, Y, et al.
出版: (2020)

Effects of chamber oxygen concentration on microstructure and mechanical properties of stainless steel 316L parts by selective laser melting
由: Sun, Zhongji, et al.
出版: (2018)

Study of the Optimized Parameters of Stainless Steel 316L Powder for Rapid Prototyping Based on Selective Laser Melting Technique
由: Apinya Laohaprapanon
出版: (2016)

Multi-physics modeling of melting-solidification characteristics in laser powder bed fusion process of 316L stainless steel
由: Shan, Xiuyang, et al.
出版: (2024)

Effect of laser power on selective laser melting of TiC strengthened 316L stainless
由: Tungul, Zirrom Umlas
出版: (2021)

A study on the use of femtosecond laser to perform surface polishing on a selective laser melting manufactured type 316L stainless steel
由: Ong, Kenrick Jin Hao
出版: (2019)

Laser metal deposition repair of stainless steel 316L parts
由: Cailloux, Thomas
出版: (2023)

Evaluation of Residual Stress in Selective Laser Melting of 316L Steel
由: Yadroitsava, Ina, et al.
出版: (2016)

Identification and evaluation of defects in selective laser melted 316L stainless steel parts via in-situ monitoring and micro computed tomography
由: Lu, Qingyang, et al.
出版: (2020)

Influence of microstructure on stainless steel 316L lattice structures fabricated by electron beam and laser powder bed fusion
由: Zeng, Zhuohong, et al.
出版: (2023)

Selective laser melting of ceramic particles strengthened stainless steel
由: Zhai, Wengang
出版: (2023)

Microstructure and mechanical properties of metallic components by selective laser melting (SLM)
由: Teo, Larry Fu Quan
出版: (2015)

Numerical analysis of heat transfer in the selective laser melting (SLM) process
由: Ng, Siu Kwok.
出版: (2011)

Modelling of the thermal condition on selective laser melting (SLM) of zirconia powders
由: Chen, Zhiyi
出版: (2014)

The effect of support structures on maraging steel MS1 parts fabricated by selective laser melting at different building angles
由: Cao, Q, et al.
出版: (2021)

Process parameter optimization for additively manufactured stainless steel 316L parts by selective electron beam melting
由: Wang, Chengcheng, et al.
出版: (2018)

The mechanics of machining selective laser melted super duplex stainless steels
由: Davidson, Karl Peter, et al.
出版: (2023)

Predictive models for fatigue property of laser powder bed fusion stainless steel 316L
由: Zhang, Meng, et al.
出版: (2020)

Laser powder bed fusion of 316L stainless steel to investigate the process parameters on densification
由: Koh, Yik Cheng
出版: (2024)

The unified creep-fatigue equation for stainless steel 316
由: Pons, Dirk John, et al.
出版: (2018)

Effects of injection molding parameter (temperature) on 316l stainless steel parts
由: Chua, Shi Wei.
出版: (2012)

Process Characterization of Ideal Porous Structure Manufacture Based on Selective Laser Melting (SLM)
由: Wang, Di, et al.
出版: (2016)

Investigation into the influence of laser melting on the sulphide inclusions in AISI 416 stainless steel
由: Tan, Y.T., et al.
出版: (2014)