Experiments with machine vision for polymer flowability analysis in powder bed fusion
This research explores the real-time process control of polymer flowability in Powder Bed Fusion (PBF). To do so, a novel system based on machine vision and an image-processing algorithm was developed and tested in an open hardware and software PBF system. The system has the ability to analyze the q...
Saved in:
| Main Authors: | , , , |
|---|---|
| 其他作者: | |
| 格式: | Conference or Workshop Item |
| 語言: | English |
| 出版: |
2018
|
| 主題: | |
| 在線閱讀: | https://hdl.handle.net/10356/88587 http://hdl.handle.net/10220/45852 |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 機構: | Nanyang Technological University |
| 語言: | English |
| 總結: | This research explores the real-time process control of polymer flowability in Powder Bed Fusion (PBF). To do so, a novel system based on machine vision and an image-processing algorithm was developed and tested in an open hardware and software PBF system. The system has the ability to analyze the quality of the powder bed by computing a defect ratio of the powder bed after each recoating operation. Then, this ratio is used as a performance variable in three full factorial Design of Experiments (DOE). The results show that the installation of machine vision and image processing system can potentially provide a signal to repeat the recoating process and correct the defect on the powder bed. At the same time, recoating process parameters can be adjusted dynamically to guarantee an optimum quality of the powder bed and minimize possible build failures. |
|---|