Multiple cracking and strain-hardening criteria of Engineered Cementitious Composites (ECC) with river sand

Multiple cracking and strain-hardening criteria of Engineered Cementitious Composites (ECC) with river sand

The inclusion of river sand in ECC alters the crack initiation and propagation behavior. As a result, the multiple cracking and pseudo strain-hardening of the river sand ECC (RS-ECC) are different from that of the typical micro-silica sand ECC. This study investigates the strain-hardening criteria f...

Saved in:

書目詳細資料
Main Authors:	Li, Yazhao, Li, Junxia, Yang, En-Hua, Guan, Xinchun
其他作者:	School of Civil and Environmental Engineering
格式:	Article
語言:	English
出版:	2024
主題:	Engineering Multiple cracking Strain-hardening criteria
在線閱讀:	https://hdl.handle.net/10356/179375
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!
機構:	Nanyang Technological University
語言:	English

相似書籍

Mechanism study of crack propagation in river sand Engineered Cementitious Composites (ECC)
由: Li, Yazhao, et al.
出版: (2022)

Investigation of matrix cracking properties of engineered cementitious composites (ECCs) incorporating river sands
由: Li, Yazhao, et al.
出版: (2022)

Analytical model for tensile strain hardening and Multiple cracking behavior of hybrid fiber-engineered cementitious composites
由: Ahmed, S.F.U., et al.
出版: (2014)

Development of engineered cementitious composites/strain-hardening cementitious composites (ECC/SHCC) with waste granite fine powders
由: Li, Ziyang, et al.
出版: (2024)

Probabilistic-based assessment for tensile strain-hardening potential of fiber-reinforced cementitious composites
由: Li, Junxia, et al.
出版: (2020)

Study of steel corrosion in strain-hardening cementitious composites (SHCC) via electrochemical techniques
由: Chen, Zhitao, et al.
出版: (2018)

Strain hardening magnesium-silicate-hydrate composites (SHMSHC) reinforced with short and randomly oriented polyvinyl alcohol microfibers
由: Sonat, Cem, et al.
出版: (2022)

Flexural responses of hybrid steel-polyethylene fiber reinforced cement composites containing high volume fly ash
由: Ahmed, S.F.U., et al.
出版: (2014)

Fire resistance of ultra-high performance strain hardening cementitious composite : residual mechanical properties and spalling resistance
由: Liu, Jin-Cheng, et al.
出版: (2019)

Structural origin of the strain-hardening of spider silk
由: Du, N., et al.
出版: (2014)

A generic model to determine crack spacing of short and randomly oriented polymeric fiber-reinforced strain-hardening cementitious composites (SHCC)
由: Li, Junxia, et al.
出版: (2022)

Improving the material sustainability of strain-hardening magnesium-silicate-hydrate composite by incorporating aggregates
由: Kumar, Dhanendra, et al.
出版: (2024)

Shortening hardening time of pre-heated thermoplastics at room temperature
由: Lai, Lance Jia Yuan
出版: (2024)

High ductile behavior of a polyethylene fiber-reinforced one-part geopolymer composite: A micromechanics-based investigation
由: Nematollahi, Behzad, et al.
出版: (2017)

Fatigue crack growth investigation on offshore pipelines with three-dimensional interacting cracks
由: Zhang, Yanmei, et al.
出版: (2018)

Influences of induction surface hardening process on mechanical properties of the oil pump shaft
由: Therdsak Kangwarnyotsak
出版: (1999)

Hardening efficiency and microstructural changes during laser surface hardening of 50CrMo4 steel
由: Maharjan, Niroj, et al.
出版: (2022)

Effect of strain rate and temperature on tensile flow behavior of SnAgCu nanocomposite solders
由: Chandra Rao, B.S.S., et al.
出版: (2014)

Cracking of ferrocement due to restrained shrinkage
由: Ong, K.C.G., et al.
出版: (2014)

Effect of heat treatment and interfacial characteristics on the work hardening behaviour of a SiC reinforced aluminum metal-matrix composite
由: Manoharan, M., et al.
出版: (2014)

Behavior of hybrid fiber ecc panels subjected to low and high velocity projectile impact-a review
由: Maalej, M., et al.
出版: (2014)

Crack repairing of high strength engineered cementitious composites using bacteria-free waste medium
由: Feng, Jianhang, et al.
出版: (2022)

Mix design of strain hardening cementitious composites through multiscale and multiphysics models
由: Li, Junxia
出版: (2017)

Effect of residual stress on wear of hole surfaces
由: Tee, K.L., et al.
出版: (2014)

Compressive behaviour of nanocrystalline Mg-5Al alloys
由: Diao, H., et al.
出版: (2014)

Laser surface hardening of AISI 1055 steel in water submerged condition
由: Zhou, Wei, et al.
出版: (2019)

Comparative study of laser surface hardening of 50CrMo4 steel using continuous-wave laser and pulsed lasers with ms, ns, ps and fs pulse duration
由: Maharjan, Niroj, et al.
出版: (2019)

Rate-dependent hardening due to twinning in an ultrafine-grained magnesium alloy
由: Li, B., et al.
出版: (2014)

Nonlinear rheology of aqueous solutions of hydrophobically modified hydroxyethyl cellulose with nonionic surfactant
由: Zhao, G.Q., et al.
出版: (2014)

MECHANICAL PROPERTIES OF A ZR-BASED BULK METALIC GLASS UNDER TENSILE CONFINEMENT CONDITION
由: WANG ZHITAO
出版: (2013)

Material characterization based on instrumented indentation
由: Swaddiwudhipong, S., et al.
出版: (2014)

Multi-criteria decision making for selecting wastewater treatment technology using fuzzy analytic hierarchy process
由: Orbecido, Aileen H., et al.
出版: (2013)

Multi-criteria-based active learning for named entity recognition
由: SHEN DAN
出版: (2011)

Simulation of instrumented indentation and material characterization
由: Tho, K.K., et al.
出版: (2014)

Fatigue performance of tubular X-joints with PJP+ welds: II - Numerical investigation
由: Qian, X., et al.
出版: (2014)

Latex-modified engineered cementitious composites (L-ECC)
由: Chen, Zhitao, et al.
出版: (2015)

Application of multi-criteria decision-making in the design of a post-disaster transitional shelter
由: Chan, Ryan Sylvester S.
出版: (2023)

Catalytic cracking of n-octane over y-type zeolite catalyst
由: Phanidar Jiratthitikan
出版: (2010)

FE simulation on fatigue failure due to cracks initiated at corrosion zone
由: Chong, Kah Leong
出版: (2024)

Catalytic cracking of n-octane over y-type zeolite catalyst
由: Phanidar Jiratthitikan
出版: (1997)