Avoiding oxygen-induced early fracture in titanium with high strength via entangled grains through laser powder bed fusion
Titanium (Ti) samples with oxygen contents of 0.13% (weight %) (0.13%O-Ti), 0.18% (0.18%O-Ti) and 0.24% (0.24%O-Ti) are printed through laser powder bed fusion (L-PBF) process. With increasing oxygen content, yield strength of L-PBF Ti under tensile testing increases without losing ductility, and be...
Saved in:
| Main Authors: | , , , , |
|---|---|
| 其他作者: | |
| 格式: | Article |
| 語言: | English |
| 出版: |
2023
|
| 主題: | |
| 在線閱讀: | https://hdl.handle.net/10356/170523 |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 總結: | Titanium (Ti) samples with oxygen contents of 0.13% (weight %) (0.13%O-Ti), 0.18% (0.18%O-Ti) and 0.24% (0.24%O-Ti) are printed through laser powder bed fusion (L-PBF) process. With increasing oxygen content, yield strength of L-PBF Ti under tensile testing increases without losing ductility, and becomes larger than that of conventionally produced Ti. Probably this is not resulted from even oxygen distribution, because nano-scale oxygen segregation is observed in 0.24%O-Ti through high-resolution scanning transmission electron microscopy (STEM). In order to get insight into fundamental mechanism of the oxygen-induced early fracture avoidance and high strength, tensile testing of L-PBF Ti is followed by quasi-in-situ electron backscatter diffraction (EBSD)/backscattered electron microscopy (BSEM). It is found that avoidance of the oxygen-induced early fracture and high strength are probably attributed to extensive entangled grains, which promotes formation of multiple slip systems and prevents the propagation of intergranular crack. |
|---|