Recent advances on high-entropy alloys for 3D printing

Recent advances on high-entropy alloys for 3D printing

Boosted by the success of high-entropy alloys (HEAs) manufactured by conventional processes in various applications, the development of HEAs for 3D printing has been advancing rapidly in recent years. 3D printing of HEAs gives rise to a great potential for manufacturing geometrically complex HEA pro...

Saved in:

書目詳細資料
Main Authors:	Han, Changjun, Fang, Qihong, Shi, Yusheng, Tor, Shu Beng, Chua, Chee Kai, Zhou, Kun
其他作者:	School of Mechanical and Aerospace Engineering
格式:	Article
語言:	English
出版:	2020
主題:	Engineering High-entropy Alloy Additive Manufacturing
在線閱讀:	https://hdl.handle.net/10356/145433
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!
機構:	Nanyang Technological University
語言:	English

相似書籍

Revealing hot tearing mechanism for an additively manufactured high-entropy alloy via selective laser melting
由: Sun, Zhongji, et al.
出版: (2020)

MEDIUM AND HIGH ENTROPY ALLOYS: DESIGN AND ADDITIVE MANUFACTURING
由: MEHMET CAGIRICI
出版: (2021)

Pulsed-wave laser additive manufacturing of CrCoNi medium-entropy alloys with high strength and ductility
由: Gao, Shubo, et al.
出版: (2025)

Unveiling the oxidation mechanism of CrTaTiMo refractory medium-entropy alloys: a synergy of density functional theory and ab initio molecular dynamics
由: Wang, Xiao, et al.
出版: (2024)

Effect of tungsten doping on the irradiation resistance of FeCrV-based refractory medium entropy alloy for potential nuclear applications
由: Hobhaydar, Arman, et al.
出版: (2023)

Influence of hydrogen on incipient plasticity in CoCrFeMnNi high-entropy alloy
由: Yang, Guanghui, et al.
出版: (2021)

In situ synthesis and microfabrication of high entropy alloy and oxide compounds by femtosecond laser direct writing under ambient conditions
由: Hegde, Chidanand, et al.
出版: (2022)

Nano-graining a particle-strengthened high-entropy alloy
由: Lee, Dong-Hyun, et al.
出版: (2021)

Effect of segregation on deformation behaviour of nanoscale CoCrCuFeNi high-entropy alloy
由: Kazakov, Arseny M., et al.
出版: (2023)

Fabrication and characterisation of CrMnFeCoNi high entropy alloy electrocatalyst for oxygen evolution reaction
由: Cao, Xun
出版: (2024)

A combinatorial assessment of AlxCrCuFeNi2 (0 < x < 1.5) complex concentrated alloys: Microstructure, microhardness, and magnetic properties
由: Borkar, T., et al.
出版: (2016)

Twin-coupled shear bands in an ultrafine-grained CoCrFeMnNi high-entropy alloy deformed at 77K
由: Li, Xiyao, et al.
出版: (2022)

Effect of short-range ordering and grain boundary segregation on shear deformation of CoCrFeNi high-entropy alloys with Al addition
由: Babicheva, Rita, et al.
出版: (2022)

Compositionally graded CoCrFeNiTₓ high-entropy alloys manufactured by laser powder bed fusion: a combinatorial assessment
由: Zhao, Yakai, et al.
出版: (2022)

High entropy alloys for hydrogen production
由: Ho, Benjamin An
出版: (2024)

Additive manufacturing of high-strength alloys for marine and offshore applications
由: Lek, Yung Zhen
出版: (2025)

Influences of hydrogen charging method on the hydrogen distribution and nanomechanical properties of face-centered cubic high-entropy alloy : a comparative study
由: Zhao, Yaki, et al.
出版: (2021)

Inhibiting the inverse Hall-Petch behavior in CoCuFeNiPd high-entropy alloys with short-range ordering and grain boundary segregation
由: Ji, Weiming, et al.
出版: (2022)

Self-reconstructed spinel surface structure enabling the long-term stable hydrogen evolution reaction/oxygen evolution reaction efficiency of FeCoNiRu high-entropy alloyed electrocatalyst
由: Huang, Kang, et al.
出版: (2023)

Effect of aluminum on the friction and wear behavior of AlₓCrFeNi medium-entropy alloys
由: Qiao, Ling, et al.
出版: (2022)

Tailoring short-range order and dislocation evolution in Cr–Co–Ni medium-entropy alloys: a molecular dynamics study
由: Jarlöv, Asker, et al.
出版: (2024)

Design and modeling of novel high-entropy alloys for laser powder bed fusion
由: Jarlöv, Asker
出版: (2025)

Effect of grain structure on the mechanical properties of a Monel alloy fabricated by laser-based directed energy deposition
由: Chen, Ze, et al.
出版: (2023)

Microstructure and mechanical behavior of laser aided additive manufactured low carbon interstitial Fe₄₉.₅Mn₃₀Co₁₀Cr₁₀C₀.₅ multicomponent alloy
由: Chew, Youxiang, et al.
出版: (2022)

Clinical Relevance of Laser-Sintered Co-Cr Alloys for Prosthodontic Treatments: A Review
由: Alifui-Segbaya, Frank, et al.
出版: (2016)

Interface analysis between inconel 625 and cobalt-chromium alloy fabricated by powder bed fusion using pulsed wave laser
由: Yao, Liming, et al.
出版: (2024)

Comparative study on Young's modulus measurements on additively manufactured alloys
由: Lim, Gordon Yicai
出版: (2024)

Atomically dispersed intrinsic hollow sites of M-M₁-M (M₁ = Pt, Ir; M = Fe, Co, Ni, Cu, Pt, Ir) on FeCoNiCuPtIr nanocrystals enabling rapid water redox
由: Lu, Yu, et al.
出版: (2022)

Mechanical properties and interfacial characterization of additive-manufactured CuZrCr/CoCrMo multi-metals fabricated by powder bed fusion using pulsed wave laser
由: Zhang, Hao, et al.
出版: (2024)

The Disruptive Evolution Of 3D Printing
由: Panda, Biranchi, et al.
出版: (2016)

Optical orientation mapping of additively manufactured alloys using directional reflectance microscopy
由: Matteo, Seita, et al.
出版: (2023)

Entropies for detection of epilepsy in EEG
由: Kannathal, N., et al.
出版: (2014)

High-entropy effect breaking the oxo wall for selective high-valent metal–oxo species generation
由: Shi, Zhonglian, et al.
出版: (2025)

Laser annealing-induced phase transformation behaviors of high entropy metal alloy, oxide, and nitride nanoparticle combinations
由: Li, Yun, et al.
出版: (2023)

Comparison study on additive manufacturing (AM) and powder metallurgy (PM) AlSi10Mg alloys
由: Chen, Biao, et al.
出版: (2020)

Microstructure evolution and mechanical property response via 3D printing parameter development of Al–Sc alloy
由: Kuo, C. N., et al.
出版: (2021)

Synergistic performance of thermoelectric and mechanical in nanotwinned high-entropy semiconductors AgMnGePbSbTe5
由: Ma, Zheng, et al.
出版: (2024)

THREE-DIMENSIONAL PRINTING OF MAGNESIUM ALLOYS FOR BIOMEDICAL APPLICATIONS
由: MOJTABA SALEHI
出版: (2021)

Nanotwins-containing microstructure and superior mechanical strength of a Cu‒9Al‒5Fe‒5Ni alloy additively manufactured by laser metal deposition
由: Li, Boyuan, et al.
出版: (2021)

Additive Manufacturing of Unmanned Aerial Vehicles: Current Status, Recent Advances, and Future Perspectives
由: Wong, Zhuo Wei, et al.
出版: (2016)