Effects sintering temperature on mechanical properties of aluminium 5% Fly ash composite produced using hot pressing

Effects sintering temperature on mechanical properties of aluminium 5% Fly ash composite produced using hot pressing

This research aims to investigate mechanical properties of aluminium matrix composites reinforced with fly ash (AMC/fly ash) produced using hot isostatic pressing (HIP). Aluminium matrix composites (AMC) were prepared from aluminium fine powder as matrix and fly ash as reinforcement The amount of fl...

Saved in:

書目詳細資料
Main Authors:	Subarmono, Subarmono, Jamasri, Jamasri, Wildan, M. Waziz, Kusnanto, Kusnanto
格式:	Article NonPeerReviewed
語言:	English
出版:	2009
主題:	Mechanical Engineering
在線閱讀:	https://repository.ugm.ac.id/35210/1/B4.pdf https://repository.ugm.ac.id/35210/
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Mechanical properties of aluminium/fly ash composites produced by hot extrusion
由: Subarmono, Subarmono, et al.
出版: (2010)

Utilization of fly ash waste as reinforcement of aluminium matrix composite produced using powder metallurgy (Pemanfaatan Limbah abu terbang sebagai penguat aluminium metal matrix composite dibuat dengan cara metalurgi serbuk)
由: Subarmono, Subarmono, et al.
出版: (2011)

Pemanfaatan Limbah Abu Terbang Sebagai Penguat Aluminium Matrix Composite
由: Subarmono, Subarmono, et al.
出版: (2008)

Studi sifat fisis dan mekanis komposit Aluminium-Fly Ash yang dibuat dengan Hot Isostatic Pressing
由: , GUSTINI, et al.
出版: (2006)

Studi sifat fisis dan mekanis komposit aluminium / Fly Ash dengan variasi fraksi berat dan temperatur sintering
由: , ZULFIKAR, et al.
出版: (2006)

Pengaruh komposisi Fly Ash dan Aluminium Silikat terhadap sifat fisis dan mekanis Fly Ash Glass-Ceramics
由: , ISMAIL, Ilda, et al.
出版: (2004)

EFFECT OF PARTICULATE SIZE OF FLY ASH AND FLY-ASH WEIGHT FRACTION TO FLEXURAL PROPERTIES OF FLY ASH â??POLYESTER COMPOSITE
由: , Kuncoro Diharjo, Jamasri, Feris Firdaus
出版: (2007)

Kekerasan dan laju keausan komposit aluminium diperkuat dengan keramik Zirconia yang dibuat dengan metode metalurgi serbuk
由: Bayu, S.W, et al.
出版: (2011)

Pengaruh Preheat dan tekanan kompaksi terhadap sifat fisis-mekanis Metal Matrix Composites (MMCs) Aluminium-Fly Ash
由: , AFRIZAL, Efi, et al.
出版: (2007)

Studi manufaktur komposit aluminium atau abu terbang dengan metode metalurgi serbuk
由: , SUBARMONO, et al.
出版: (2010)

Pengaruh tekanan kompaksi dan suhu Sintering terhadap sifat mekanis Glass Ceramics dari Fly Ash
由: , NURZAL, et al.
出版: (2005)

Pengaruh kadar tambang (Cu) terhadap sifat mekanis aluminium matrix composite berpenguat alumina dibuat secara ekstruksi
由: Subarmono, Subarmono, et al.
出版: (2011)

SINTERING CHARACTERISTICS OF ALUMINA REINFORCED ALUMINIUM MATRIX COMPOSITE WITH ZINC AS SINTERING AID MADE BY POWDER METALLURGY
由: LUTHFI IRSYAD (NIM : 12514061), WILDAN

STUDI SIFAT FISIK, MEKANIK DAN THERMAL SHOCK KOMPOSIT FLY ASH DAN LIMBAH GELAS YANG DIBUAT MELALUI PROSES SINTER TANPA TEKANAN
由: , Muhammad Balfas, Ir.,MT., et al.
出版: (2011)

Mechanical properties and microstructure of ultra-lightweight cement composites with fly ash cenospheres after exposure to high temperatures
由: Huang Zhenyu, et al.
出版: (2020)

EFFECT OF COMPOSITION 1, 3, AND 5 WT% COPPER ON THE PORES, MICROSTRUCTURE, AND HARDNESS AS A PRODUCT OF TITANIUM AND COPPER SINTERED ALLOY BY COLD-PRESS AND HOT-PRESS
由: Adi Pamungkas, Rizki

Utilization of toray fly ash in the hot rolled sheet wearing course (HRS-WC) mixture (fly ash as additive in asphalt)
由: , PRAJA, Sumantri Widya, et al.
出版: (2009)

Cold - hot isostatic pressing of superalloy composites
由: Ng, Lian Sin.
出版: (2008)

THE EFFECT OF COPPER COMPOSITION 1, 3 AND 5 WT% Cu MIXED IN CONVENTIONAL AND MECHANICAL ALLOYING ON MICROSTRUCTURE AND HARDNESS OF Ti-Cu ALLOY USING HOT PRESSING-SINTERING METHODS
由: Fitri, Anisa

THE INFLUENCE OF FLY - ASH AS A FILLER ON SOME CHARACTERISTICS OF HOT ROLLED ASPHALT
由: Tjakra Amidjaja, Moh.Tauchid

Comparison of sintering condition and radio frequency plasma discharge on the conversion of coal/biomass fly ash into high-temperature thermal energy storage material
由: Lin, Yvonne Wenlin, et al.
出版: (2021)

Hot isostatic pressing of SiCp/Al-Li composites
由: Sia, Kheng Yok.
出版: (2009)

Interfacial properties of hot-isostatically-pressed metal-matrix composites
由: Lee, Li Ling.
出版: (2009)

Composition and microstructure of fly ash geopolymer containing metakaolin
由: K. Pimraksa, et al.
出版: (2018)

Composition and microstructure of fly ash geopolymer containing metakaolin
由: K. Pimraksa, et al.
出版: (2018)

An investigation on the mechanical properties of concrete mixed with crumb rubber and fly ash after exposure to elevated temperature
由: Bautista, Denise Riana M., et al.
出版: (2018)

Mechanical strength of natural rubber filled fly ash
由: A. Dasaesamoh, et al.
出版: (2020)

Development of Aluminium Oxide/polyamide 12 composite powders for direct laser sintering
由: Koh, Wee Kiat
出版: (2018)

Influence of sintering temperature on physical and mechanical properties of hydroxyapatite-calcium titanate composite
由: Suchittra Inthong, et al.
出版: (2019)

Creep and hot ISO-static pressing of aerospace metal matrix composites
由: Hung, Nguyen Phu, et al.
出版: (2008)

Residual mechanical properties and spalling resistance of strain-hardening cementitious composite with Class C fly ash
由: Liu, Jin-Cheng, et al.
出版: (2020)

Utilization of toray fly ash as filler substitution in the hot rolled-wearing course (HRS-WC) mixture
由: , CANDRA, Fedi, et al.
出版: (2009)

Microstructure and mechanical behavior of hot extruded aluminum/tin-bismuth composites produced by powder metallurgy
由: Khan, A., et al.
出版: (2021)

Pengaruh pemanasan selama pengelasan terhadap sifat mekanik hasil pengelasan baja K100 special K
由: Subarmono, Subarmono, et al.
出版: (2011)

Ketangguhan paduan aluminium Cor 2024 hasil pengecoran elektromagnit
由: , WAHYUNI, Nur, et al.
出版: (2004)

Pengaruh Remelting terhadap sifat fisis dan mekanis paduan aluminium
由: , BUDIYONO, Aris, et al.
出版: (2004)

Novel processing of Cu-bonded La-Ce-Fe-Co-Si magnetocaloric composites for magnetic refrigeration by low-temperature hot pressing
由: Peng, D. R., et al.
出版: (2020)

Modification of gasification fly ash using calcium aluminate cements to produce sorbents for carbon capture
由: See, Samuel Haw Hann
出版: (2022)

Pengaruh proses chemical milling terhadap sifat fisis dan mekanis pada paduan aluminium
由: , SUPARJO, et al.
出版: (1999)

Pengaruh kecepatan pengecoran pada proses pembekuan aluminium 2024 terhadap laju rambat retak
由: , WIYOTO, et al.
出版: (2004)