Pemanfaatan Cfd Fluent/Uns 4.1.9 Dalam Perbaikan Desain Bilah Impeler Pompa Sentrifugal Produk Lokal
This research is aimed at improving the design of a locally produced centrifugal pump NS-50 by the use of CFD (Computational Fluid Dynamics) Fluent/uns version 4.1.9. Four factors involved in this study: blade number, thickness, inlet angle 131, and outlet angle 132. Original pump has 6 blades with...
محفوظ في:
| المؤلف الرئيسي: | |
|---|---|
| التنسيق: | مقال NonPeerReviewed |
| منشور في: |
[Yogyakarta] : Fak. Kedokteran Gigi UGM
2002
|
| الموضوعات: | |
| الوصول للمادة أونلاين: | https://repository.ugm.ac.id/21924/ http://i-lib.ugm.ac.id/jurnal/download.php?dataId=4803 |
| الوسوم: |
إضافة وسم
لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!
|
| الملخص: | This research is aimed at improving the design of a locally produced centrifugal pump NS-50 by the use of CFD (Computational Fluid Dynamics) Fluent/uns version 4.1.9. Four factors involved in this study: blade number, thickness, inlet angle 131, and outlet angle 132. Original pump has 6 blades with 5 mm thickness, and /3, = 132 = 41,4". Optimization is targetted to achieve the highest efficiency possible by applying Response SurfaceM , Method P is (RSM). An hydraulic index of power, imp and pT is
fficiency, 1P, defined as (E/E reference ) x (P/Preference )x(11T,reference/RT ) where E is e turbulence-viscosity-ratio, is used as a measure of improvement. Original design's 1P is set to 1. The improved design achieved with blade number 7, 131 = 41.40" (tolerance �10%), 132 = 32.99' (tolerance +10%), and blade thickness 5.7540.75 mm is obtained with 24 observations only and IP value of 1.732.
Keywords: CFD, RSM, Turbulence |
|---|