STUDI SAMBUNGAN KOMPOSIT BAJA RINGAN-LAMINASI KAYU DENGAN ALAT SAMBUNG BAUT
Cold formed steel, which is nowadays popular in Indonesia for roof structures, has small thickness that makes it easy to buckling. Combining cold formed steel with timber would be an effective solution for buckling problem prevention. There were some previous studies about composite of cold formed s...
محفوظ في:
| المؤلفون الرئيسيون: | , |
|---|---|
| التنسيق: | Theses and Dissertations NonPeerReviewed |
| منشور في: |
[Yogyakarta] : Universitas Gadjah Mada
2014
|
| الموضوعات: | |
| الوصول للمادة أونلاين: | https://repository.ugm.ac.id/133320/ http://etd.ugm.ac.id/index.php?mod=penelitian_detail&sub=PenelitianDetail&act=view&typ=html&buku_id=73915 |
| الوسوم: |
إضافة وسم
لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!
|
| الملخص: | Cold formed steel, which is nowadays popular in Indonesia for roof structures,
has small thickness that makes it easy to buckling. Combining cold formed steel
with timber would be an effective solution for buckling problem prevention. There
were some previous studies about composite of cold formed steel and timber,
however topic about the connection is very limited. This study is aimed to find
suitable connections system for composite cold formed steel-timber lamina.
Cold formed steel 75Z08 and Swietenia mahagoni were used in this study. Two
bolts of 8 mm in diameter were used in composite connection samples. There were
twelve joint specimens: six joints loaded in parallel loading direction and another
six joints loaded in perpendicular loading direction. In both parallel and
perpendicular loaded joints, two different side members were used: steel plate (t
= 4 mm) and plywood (SG = 0.41 |
|---|