PURWARUPA SISTEM PENGENDALIAN DAN PEMANTAUAN SUHU DAN KELEMBABAN RUANGAN BERBASIS WEB DENGAN ATMEGA16
A prototype of controlling and monitoring system of the room�s temperature and humidity based on web using ATMega16 has been made. This prototype is designed to facilitate the users in monitoring and controlling the room�s temperature and humidity. The system consists of temperature and humidity...
Saved in:
| Main Authors: | , |
|---|---|
| Format: | Theses and Dissertations NonPeerReviewed |
| Published: |
[Yogyakarta] : Universitas Gadjah Mada
2013
|
| Subjects: | |
| Online Access: | https://repository.ugm.ac.id/121534/ http://etd.ugm.ac.id/index.php?mod=penelitian_detail&sub=PenelitianDetail&act=view&typ=html&buku_id=61622 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Universitas Gadjah Mada |
| Summary: | A prototype of controlling and monitoring system of the room�s temperature
and humidity based on web using ATMega16 has been made. This prototype is
designed to facilitate the users in monitoring and controlling the room�s temperature
and humidity. The system consists of temperature and humidity sensor SHT11, a fan
controller, a relay circuit, a microcontroller system and a software system. The
controlling and the outcome of the room�s temperature and humidity measurements
will be processed and displayed on web on the local host.
The system of monitoring and controlling the room�s temperature and
humidity is designed using the sensor of temperature and humidity SHT11,
microcontroller ATMega16, serial of communication devices using cable DKU5 and
software program. The software program uses Visual Basic 6.0 and MySQL 5.1
program as the data basis storage, also Visual Studio 2008 as the web program.
The controlling and monitoring system can be implemented using
microcontroller ATMega16 and web on the local host. Sensor SHT11 which is
positioned in one side of the room is used to detect the changes occurs on the
temperature and humidity of the room. The data from the sensor will be the input of
the microcontroller ports which then will be controlled and monitored. The
temperature control will activate or deactivate the actuator depends on the condition
filled so that the temperature and humidity of the room can be watched over. As for
the actuator control in hairdryer and fan, it uses set point control which can be
selected. On the other hand, the set point control in the mist maker has been installed
on the system so it is unchangeable. |
|---|