Effect of Cold Rolling Reduction and Testing Temperature to the Pitting Corrosion Resistance of UNS N06625 Based on ASTM G48 C

Effect of Cold Rolling Reduction and Testing Temperature to the Pitting Corrosion Resistance of UNS N06625 Based on ASTM G48 C

Corrosion is a phenomenon that happens naturally on metallic materials in order to achieve an electrochemical equilibrium. This phenomenon causes severe damage if it’s not well-controlled. The easiest corrosion control technique is by properly selection of material used. Nickel-base alloys is one of...

Saved in:

書目詳細資料
主要作者:	Diwang Ariyoseto, Huda
格式:	Final Project
語言:	Indonesia
在線閱讀:	https://digilib.itb.ac.id/gdl/view/33546
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!
機構:	Institut Teknologi Bandung
語言:	Indonesia

相似書籍

Effect of Cold Rolling Reduction and Testing Temperature to the Pitting Corrosion Resistance of UNS N06625 Based on ASTM G48 C
由: DIWANG ARIYOSETO (NIM : 13714033), HUDA

Effect of Cold Rolling Reduction to the Crevice Corrosion Resistance of UNS N06625 Based on ASTM G48 D
由: Wulansari, Nurfathonah

Study of the Effect of GTAW Welding Process on Pitting Corrosion Resistance of Material UNS N06625 Based on ASTM G48 C
由: SEPTIAN CHESAR RAHARJA SUPUTERA (NIM : 13713028), GEDE

Study of Welding Process towards Crevice Corrosion Resistance on UNS N06625 Material According to ASTM G 48 D
由: Bastara Putra, Nugraha

Study of Welding Process towards Crevice Corrosion Resistance on UNS N06625 Material According to ASTM G 48 D
由: BASTARA PUTRA (NIM : 13713021), NUGRAHA

THE EFFECT OF PLASTIC STRAIN AND TEMPERATURE TO PITTING CORROSION RESISTANCE AT STAINLESS STEEL 316L ACCORDING TO ASTM G48
由: Hanistia Pahlevi, Banggas

EFEK TEMPERATUR DAN DEFORMASI DINGIN PADA AISI TERHADAP KETAHANAN PITTING CORROSION BERDASARKAN ASTM G-48
由: Sekarwigati, Titis

THE EFFECT OF TEMPERATURE AND CHLORIDE ION CONCENTRATION ON PITTING CORROSION AND CRITICAL PITTING TEMPERATURE OF UNS S31603
由: Julie Aulia - 13714035, Catia

THE EFFECT OF TEMPERATURE AND CHLORIDE ION CONCENTRATION ON PITTING CORROSION AND CRITICAL PITTING TEMPERATURE OF UNS S31603
由: Julie Aulia, Catia

INFLUENCE OF PLASTIC DEFORMATION AGAINST CRITICAL TEMPERATURE CORROSION CRACKS IN STAINLESS STEEL 316L BASED ON ASTM G48
由: Rahimsyah, Muhammad

STUDI PENGARUH DEFORMASI PLASTIS DAN TEMPERATUR TERHADAP KETAHANAN KOROSI SUMURAN PADA MATERIAL UNS N08825 BERDASARKAN ASTM G48
由: Amalia Martiano, Annisa

STUDI PENGARUH DEFORMASI PLASTIS DAN TEMPERATUR TERHADAP KETAHANAN KOROSI CELAH PADA MATERIAL UNS N08825 BERDASARKAN ASTM G48
由: Mersa Bayu Wibisono, Mohammad

STUDI PENGARUH DEFORMASI PLASTIS TERHADAP KETAHANAN KOROSI CELAH PADA MATERIAL BAJA TAHAN KARAT DUPLEX UNS S32760 BERDASARKAN ASTM G-48
由: Trisaputra Sidiq, Esa

STUDY OF THE EFFECT COLD ROLLING ON MECHANICAL PROPERTIES OF AUSTENITIC MANGANESE STEEL ASTM A-128 GRADE C
由: Reza Hermawan, Mohammad

PENGARUH PENGELASAN TERHADAP TEMPERATUR KRITIS KOROSI SUMURAN PADA BAJA TAHAN KARAT 316L BERDASARKAN ASTM G-48
由: Yulfandi

STUDI PENGARUH LAS TIG TERHADAP TEMPERATUR KRITIS KOROSI CELAH PADA SS 316L DENGAN PENGUJIAN ASTM G 48
由: Tagentar

STUD I PENGARUH REGANGAN PLASTIS TARIK DAN TEMPERA TUR TERHADAP KETAHANAN KOROSI SUMURAN PADA BAJA TAHAN KARAT DUPLEX UNS 832760 BERDASARKAN ASTM G-48
由: Christoffer Soesilo, Vincent

STUDI PENGARUH REGANGAN PLASTIS DAN TEMPERATUR TERHADAP KETAHANAN KOROSI CELAH PADA BAJA TAHAN KARAT 316L BERDASARKAN ASTM G48
由: Aziz, Rasyid

Pitting corrosion on aluminium in absence of chloride
由: Blackwood, D.J., et al.
出版: (2014)

Influence of Thermal Cycling Temperature on the Recrystallization of Cold Rolled Stainless Steel 316L
由: Fahmi Mubarok, -, et al.
出版: (2021)

STUDI PENGARUH KONSENTRASI ASAM ASETAT DAN TEMPERATUR DALAM FENOMENA TOP OF THE LINE CORROSION PADA BAJA KARBON RENDAH ASTM A735
由: Arfi Hernandi, Mohammad

Experimental and mathematical investigation of the cold roll forming process
由: Rohana S. Senanayake.
出版: (2008)

Study of pitting corrosion behaviour of stainless and duplex stainless steels
由: Tan, Wilfred Liang Wei.
出版: (2011)

Pitting and exfoliation corrosion susceptibility of marine grade aluminium alloys
由: Sukumar Jana.
出版: (2011)

A Study on Pitting Corrosion of Stainless Steels in Halide Solutions
由: CHUA SHU ER SHERLYN
出版: (2012)

OPTIMALISASI PENGELASAN BAJA ASTM A387 DENGAN CREUSABRO 8000 PADA KASUS COLD CRACKING
由: Farqa Ramadina, Ully

STUDI PENGARUH TEMPERATUR DAN KONSENTRASI KLORIDA TERHADAP PERILAKU PITTING CORROSION AISI 316L DENGAN METODE IMERSI
由: Wahyunda, Muhamad

A experimental feasibility study of pre-stressed deep cold rolling
由: Lauw, Joshua
出版: (2015)

MICROSTRUCTURE AND HARDNESS OF ALUMINUM ALLOY 5251 COLD ROLLING AND ANNEALING RESULTS
由: Irsyad, Muhammad

Post-treatment by sodium silicate after zinc phosphating on cold-rolled steel
由: Dech-Oup S., et al.
出版: (2014)

Post-treatment by sodium silicate after zinc phosphating on cold-rolled steel
由: Supunsa Dech-Oup, et al.
出版: (2018)

Experimental and numerical investigation of deep cold rolling on Ni-based super alloy
由: Lee, Zi Kang
出版: (2019)

THE EFFECT OF COLD ROLLING PROCESS ON THE WEAR RESISTANCE OF AL-SI-MG ALLOY
由: Faza Ardani, Najmi

SK Dekan Fakultas Kedokteran No.48/UN3.1.1/KD/2019
由: Laksmi Wulandari, -
出版: (2022)

STUDY OF FITNESS FOR SERVICE PIPELINE DUE TO PITTING CORROSION BASED ON API RP 579
由: TRI WAHYUDI (NIM : 13105125); Pembimbing : Prof. Dr. Ir. IGN. Wiratmaja Puja, EKO

THE EFFECT OF TENSILE STRESS ON AMMONIA VAPOR CORROSION OF UNS C71500 MATERIAL
由: Destri Pramesthi, Chevira

UN interventionism in post-cold war Southeast Asia : International society in action?
由: Ang, Tiau Linn
出版: (2010)

A study on the effect of the thickness of cold-rolled iron shavings on the dechlorination of trichloroethlene (TCE)
由: Cruz, Aireena-Lyza G., et al.
出版: (2005)

Microstructural changes caused by deep cold rolling and their effects on fatigue life of ductile iron
由: Su, Zhenlin
出版: (2015)

Heat treatment behaviour of multi-component white cast iron for cold work roll
由: Wanaporn Khanitnantharak
出版: (2000)