การศึกษาและออกแบบอุปกรณ์ป้อนมูลฝอยสำหรับเตาเผา
This research aims at studying and designing a feeder for an incinerator by installing a feeder at a charging door of 2-chamber incinerator. The feeder used in this research is a rotary vane type and the blades can be changed. Four types of blades named full-straight, full-curve, rib-straight and ri...
محفوظ في:
| المؤلف الرئيسي: | |
|---|---|
| مؤلفون آخرون: | |
| التنسيق: | Theses and Dissertations |
| اللغة: | Thai |
| منشور في: |
จุฬาลงกรณ์มหาวิทยาลัย
1999
|
| الموضوعات: | |
| الوصول للمادة أونلاين: | https://digiverse.chula.ac.th/Info/item/dc:47226 |
| الوسوم: |
إضافة وسم
لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!
|
| المؤسسة: | Chulalongkorn University |
| اللغة: | Thai |
| الملخص: | This research aims at studying and designing a feeder for an incinerator by installing a feeder at a charging door of 2-chamber incinerator. The feeder used in this research is a rotary vane type and the blades can be changed. Four types of blades named full-straight, full-curve, rib-straight and rib-curve are used in this research. The feeder is powered by an A.C. motor 220 V, 3-phase which is connected to a gearbox. Speed controlling is done by an adjustable frequency inverter. From the experiment the results are as: 1.The electrical power required for this feeder is 500 - 593 watts. Each combustion period (2 hours) consumed electric cost of 3-3.6 baths. 2.The thermal efficiency of combustion, when using 4 types of blade: full-straight, full-curve, rib-straight and rib-curve are 11.45,12.71, 12.76 and13.70 % respectively. 3.The thermal efficiency of the combustion when using a feeder is increased by 18.0 - 41.2 % (by calculating in percentage) when compare with using batch feeding |
|---|