The critical cooling rate and microstructure evolution of Zr41.2Ti13.8Cu12.5Ni10Be22.5 composites by Bridgman solidification

The critical cooling rate and microstructure evolution of Zr41.2Ti13.8Cu12.5Ni10Be22.5 composites by Bridgman solidification

10.1016/j.intermet.2009.06.016

Saved in:

書目詳細資料
Main Authors:	Cheng, J.L., Chen, G., Gao, P., Liu, C.T., Li, Y.
其他作者:	MATERIALS SCIENCE AND ENGINEERING
格式:	Article
出版:	2014
主題:	B. Glasses, metallic C. Rapid solidification processing D. Microstructure
在線閱讀:	http://scholarbank.nus.edu.sg/handle/10635/86780
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!
機構:	National University of Singapore

相似書籍

Glass formation, microstructure evolution and mechanical properties of Zr41.2Ti13.8Cu12.5Ni10Be 22.5 and its surrounding alloys
由: Cheng, J.L., et al.
出版: (2014)

Multiple maxima in glass-forming ability in Al-Zr-Ni system
由: Yang, H., et al.
出版: (2014)

Easy glass formation in La55Ni20Al25 by Bridgman solidification
由: Li, Y., et al.
出版: (2014)

Microstructure control and ductility improvement of La-Al-(Cu, Ni) composites by Bridgman solidification
由: Zhang, Y., et al.
出版: (2014)

Rapid solidification behavior of Zn-rich Zn-Ag peritectic alloys
由: Xu, W., et al.
出版: (2014)

Cellular growth of Zn-rich Zn-Ag alloys processed by rapid solidification
由: Xu, W., et al.
出版: (2014)

Observation of lamellar structure in a Zn-rich Zn-6.3at.% Ag hyper-peritectic alloy processed by rapid solidification
由: Xu, W., et al.
出版: (2014)

Optimal glass-forming composition and its correlation with eutectic reaction in the Ti-Ni-Al ternary system
由: Lu, B.-c., et al.
出版: (2014)

Development of nano-Y2O3 containing magnesium nanocomposites using solidification processing
由: Hassan, S.F., et al.
出版: (2014)

Effect of particulate size of Al2O3 reinforcement on microstructure and mechanical behavior of solidification processed elemental Mg
由: Hassan, S.F., et al.
出版: (2014)

Science and engineering of casting solidification
由: Stefanescu, Doru Michael
出版: (2017)

Solidification behaviours and discontinuous precipitation in Zn-Rich Zn-Ag peritectic alloys
由: XU WEI
出版: (2010)

Optimum glass formation at off-eutectic composition and its relation to skewed eutectic coupled zone in the La based La-Al-(Cu,Ni) pseudo ternary system
由: Tan, H., et al.
出版: (2014)

Influence of Overlapping Tracks on Microstructure Evolution and Corrosion Behavior in Laser-melt Magnesium Alloy
由: Guan, Ying Chun, et al.
出版: (2016)

Effect of addition of nano-al2o3 and copper particulates and heat treatment on the tensile response of az61 magnesium alloy
由: Nguyen, Q.B., et al.
出版: (2014)

Effect of nano-alumina and copper micron size particulates on microstructure and mechanical properties of magnesium alloy AZ31
由: Nguyen, Q.B., et al.
出版: (2014)

Simultaneous effect of nano-Al 2O 3 and micrometre Cu particulates on microstructure and mechanical properties of magnesium alloy AZ31
由: Nguyen, Q.B., et al.
出版: (2014)

Effect of ball milling the hybrid reinforcements on the microstructure and mechanical properties of Mg-(Ti + n-Al2O3) composites
由: Sankaranarayanan, S., et al.
出版: (2014)

Effect of nano-ZrO2 particulates reinforcement on microstructure and mechanical behavior of solidification processed elemental Mg
由: Hassan, S.F., et al.
出版: (2014)

Pinpoint the best glass forming alloy by microstructure study in Cu 8Zr3-Cu10Zr7eutectic system of Cu-Zr binary system
由: Wang, D., et al.
出版: (2014)

Laser-induced microstructural development and phase evolution in magnesium alloy
由: Guan, Yingchun, et al.
出版: (2016)

Structures, properties and responses to heat treatment of melt-spun Cu - Y alloys
由: Li, Y., et al.
出版: (2014)

Thiomer solidification of an ASR bottom ash: Optimization based on compressive strength and the characterization of heavy metal leaching
由: Son, Jae Hyop, et al.
出版: (2017)

Unidirectional solidification of a Zn-rich Zn-2.17 wt%Cu hypo-peritectic alloy
由: Ma, D., et al.
出版: (2014)

Multiple maxima of GFA in three adjacent eutectics in Zr-Cu-Al alloy system - A metallographic way to pinpoint the best glass forming alloys
由: Wang, D., et al.
出版: (2014)

Glass forming ability of binary ZR-CU and ternary ZR-CU-AL alloys
由: WANG DONG
出版: (2010)

Quaternary Fe-based bulk metallic glasses with a diameter of 5 mm
由: Han, Z., et al.
出版: (2014)

Comparison of reactive magnesia, quick lime, and ordinary Portland cement for stabilization/solidification of heavy metal-contaminated soils
由: Li, Wentao, et al.
出版: (2020)

Thermodynamics of La based La-Al-Cu-Ni-Co alloys studied by temperature modulated DSC
由: Lu, Z.P., et al.
出版: (2014)

Separation and purification of Si from Sn-30Si alloy by electromagnetic semi-continuous directional solidification
由: Huang, Feng, et al.
出版: (2020)

Solidification/stabilization of ASR fly ash using thiomer material: Optimization of compressive strength and heavy metals leaching
由: Baek, Jin Woong, et al.
出版: (2017)

Easy glass formation in La- and Pd-based alloys by Bridgman solidification
由: Goh, T.T., et al.
出版: (2014)

Synthesis of in situ bulk glass matrix composite in by Bridgman method
由: Tan, H., et al.
出版: (2014)

Solidification processed Mg/Al bimetal macrocomposite: Microstructure and mechanical properties
由: Paramsothy, M., et al.
出版: (2014)

โครงสร้างจุลภาคของโลหะผสมอะลูมิเนียมความแข็งแรงสูงพิเศษ (AI-Zn-Mg-Cu) ภายหลังการแข็งตัวและภายหลังกระบวนการอบเป็นเนื้อเดียวที่ผ่านการหล่อด้วยกระบวนการ Direct Chill ภายใต้การกวนของแม่เหล็กไฟฟ้าความถี่ต่ำ
由: ปราโมทย์ ธีรทีปวิวัฒน์
出版: (2008)

Glass formation in the ternary Zr-Zr2Cu-Zr2Ni system
由: Yang, H., et al.
出版: (2014)

Composition optimization of the NiZrYAl glass forming alloys
由: Jing, Q., et al.
出版: (2014)

Formation of metallic glasses near intermetallics in Zr-Cu and Zr-Cu-Ti systems.
由: WANG YINXIAO
出版: (2012)

Composition effects on glass-forming ability and its indicator γ
由: Lu, Z.P., et al.
出版: (2014)

Solidification behaviour of water-cooled and subzero chilled cast iron
由: Seah, K.H.W., et al.
出版: (2014)