Effects of lower cobalt binder concentrations in sintering of tungsten carbide

Effects of lower cobalt binder concentrations in sintering of tungsten carbide

10.1016/j.msea.2006.05.118

Saved in:

書目詳細資料
Main Authors:	Li, T., Li, Q., Fuh, J.Y.H., Yu, P.C., Wu, C.C.
其他作者:	MECHANICAL ENGINEERING
格式:	Article
出版:	2014
主題:	Abnormal grain growth Cemented tungsten carbide Hardness test W2C phase
在線閱讀:	http://scholarbank.nus.edu.sg/handle/10635/85077
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!
機構:	National University of Singapore

相似書籍

Effects of AGG on fracture toughness of tungsten carbide
由: Li, T., et al.
出版: (2014)

Abnormal Grain Growth of Tungsten Carbide in Small Amount of Cobalt: Mechanism and Application
由: LI TAO
出版: (2019)

Two-material powder injection molding of functionally graded WC-Co components
由: Li, T., et al.
出版: (2014)

Study of micro-EDM of tungsten carbide with workpiece vibration
由: Jahan, M.P., et al.
出版: (2014)

Performance evaluation of cryogenically treated tungsten carbide tools in turning
由: Yong, A.Y.L., et al.
出版: (2014)

Characteristics of high speed micro-cutting of tungsten carbide
由: Liu, K., et al.
出版: (2014)

CBN tool wear in ductile cutting of tungsten carbide
由: Liu, K., et al.
出版: (2014)

Ductile cutting of tungsten carbide
由: Liu, K., et al.
出版: (2014)

Study of the surface integrity of the machined workpiece in the EDM of tungsten carbide
由: Lee, S.H., et al.
出版: (2014)

Performance of cryogenically treated tungsten carbide tools in milling operations
由: Yong, A.Y.L., et al.
出版: (2014)

Nanometer-scale ductile cutting of tungsten carbide
由: Liu, K., et al.
出版: (2014)

Performance evaluation of cryogenically treated tungsten carbide cutting tool inserts
由: Seah, K.H.W., et al.
出版: (2014)

Laser sintering of tungsten carbide cutter shafts with integrated cooling channels
由: Josef, Tomas, et al.
出版: (2018)

Cobalt tungsten phosphide with tunable W-doping as highly efficient electrocatalysts for hydrogen evolution reaction
由: Zhang, Bowei, et al.
出版: (2022)

Study of ductile mode cutting in grooving of tungsten carbide with and without ultrasonic vibration assistance
由: Liu, K., et al.
出版: (2014)

Migration of materials during finishing micro-EDM of tungsten carbide
由: Jahan, M.P., et al.
出版: (2014)

A review on the conventional and micro-electrodischarge machining of tungsten carbide
由: Jahan, M.P., et al.
出版: (2014)

Characteristics of ultrasonic vibration-assisted ductile mode cutting of tungsten carbide
由: Liu, K., et al.
出版: (2014)

Micro-ball endmilling of tungsten carbide for micro-molding and prototyping applications
由: Arif, M., et al.
出版: (2014)

Machinability study of tungsten carbide using PCD tools under ultrasonic elliptical vibration cutting
由: Nath, C., et al.
出版: (2014)

A study on the fine-finish die-sinking micro-EDM of tungsten carbide using different electrode materials
由: Jahan, M.P., et al.
出版: (2014)

Study of the effect of machining parameters on the machining characteristics in electrical discharge machining of tungsten carbide
由: Lee, S.H., et al.
出版: (2014)

Comparing carbide sludge-ground granulated blastfurnace slag and ordinary Portland cement: different findings from binder paste and stabilized clay slurry
由: Li, Wentao, et al.
出版: (2022)

A STUDY OF THE OPTIMUM PARAMETERS IN EDM MACHINING OF TUNGSTEN CARBIDE MATERIAL
由: KHIN MOE AYE
出版: (2020)

A study on the effect of tool nose radius in ultrasonic elliptical vibration cutting of tungsten carbide
由: Nath, C., et al.
出版: (2014)

STUDY OF TUNGSTEN NANOWIRES GROWN BY FIELD EMISSON INDUCED METHOD
由: YOU GUO FENG
出版: (2010)

Modelling and experimental investigation on the effect of nanopowder-mixed dielectric in micro-electrodischarge machining of tungsten carbide
由: Jahan, M.P., et al.
出版: (2014)

A study on the quality micro-hole machining of tungsten carbide by micro-EDM process using transistor and RC-type pulse generator
由: Jahan, M.P., et al.
出版: (2014)

MICRO-EDM-BASED MULTI-PROCESS MACHINING OF TUNGSTEN CARBIDE
由: MUHAMMAD PERVEJ JAHAN
出版: (2010)

Development, modeling, and experimental investigation of low frequency workpiece vibration-assisted micro-EDM of tungsten carbide
由: Jahan, M.P., et al.
出版: (2014)

A comparative study on the performance of sinking and milling micro-EDM for nanofinishing of tungsten carbide
由: Jahan, M.P., et al.
出版: (2014)

On-machine fabrication of high-aspect-ratio micro-electrodes and application in vibration-assisted micro-electrodischarge drilling of tungsten carbide
由: Jahan, M.P., et al.
出版: (2014)

An experimental investigation on the surface characteristics of tungsten carbide for the fine-finish die-sinking and scanning micro-EDM
由: Jahan, M.P., et al.
出版: (2014)

Synthesis of silicon carbide by arc-discharge process
由: Paitoon Lertsurasakda
出版: (2011)

The utilization of carbide lime for the production of cinder bricks and unfired insulation materials
由: Ayson, Chona Corazon, et al.
出版: (1995)

Cryogenic treatment of cutting tools
由: YONG YUN LEONG, ANDREW
出版: (2010)

Aqueous phenol oxidation catalysed by molybdenum and tungsten carbonyl complexes
由: Wang, Z., et al.
出版: (2014)

Synthesis of poly(phenyleneethynylene)s using calcium carbide
由: Nopparat Thavornsin
出版: (2015)

Synthesis of poly(phenyleneethynylene)s using calcium carbide
由: Nopparat Thavornsin
出版: (2012)

The manufacture of silicon carbide abrasive
由: Escobar, Arturo
出版: (1961)