Mechanical properties of nanocrystalline Mg-Al-Ti alloys

Mechanical properties of nanocrystalline Mg-Al-Ti alloys

Journal of Metastable and Nanocrystalline Materials

Saved in:

書目詳細資料
Main Authors:	Thein, M.A., Lu, L., Lai, M.O.
其他作者:	MECHANICAL ENGINEERING
格式:	Conference or Workshop Item
出版:	2014
主題:	Grain Size Mechanical Alloying Mechanical Properties Mg Alloy Powder Metallurgy
在線閱讀:	http://scholarbank.nus.edu.sg/handle/10635/73593
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!
機構:	National University of Singapore

相似書籍

Kinetics of grain growth in nanocrystalline magnesium-based metal-metal composite synthesized by mechanical alloying
由: Thein, M.A., et al.
出版: (2014)

Structure and properties of Mg-Al-Ti-B alloys synthesized via mechanical alloying
由: Lu, L., et al.
出版: (2014)

Microstructure and Mechanical Properties of a Mg-5Al Alloy Synthesized by Mechanical Alloying
由: Gao, X., et al.
出版: (2014)

Mechanical properties of nanostructured Mg-5 wt%Al-x wt%AlN composite synthesized from Mg chips
由: Thein, M.A., et al.
出版: (2014)

Grain size dependent tensile behavior of Mg-3%Al alloy at elevated temperatures
由: Mallick, A., et al.
出版: (2014)

Fabrication and characteristics of magnesium alloys produced via powder metallurgy
由: Cao, P., et al.
出版: (2014)

Fabrication and Microstructure of Mechanically Alloyed Mg-Al-Nd Alloys
由: Yan, C., et al.
出版: (2014)

Influence of SiC particles on mechanical properties of Mg based composite
由: Chua, B.W., et al.
出版: (2014)

Processing and deformation mechanisms of bulk ultrafine grained and nanostructured Mg alloy via mechanical alloying technique
由: CHUA BENG WAH
出版: (2010)

Synthesis of nanocrystalline tungsten alloy by mechanical alloying and annealing
由: Liu, Z.G., et al.
出版: (2014)

Nanostructured Mg-5%Al-x%Nd alloys
由: Lu, L., et al.
出版: (2014)

Compressive behaviour of nanocrystalline Mg-5Al alloys
由: Diao, H., et al.
出版: (2014)

The Origin of High Strength and High Ductility in Nanostructured Mg-5%Al-x%Nd Alloys
由: Lu, L., et al.
出版: (2014)

Effects of grain size on the wear of recycled AZ91 Mg
由: Shanthi, M., et al.
出版: (2014)

Influence of process control agent on interdiffusion between Al and Mg during mechanical alloying
由: Lu, L., et al.
出版: (2014)

Synthesis and mechanical properties of nanostructured Mg-Al-Nd alloys
由: Yan, C., et al.
出版: (2014)

Synthesis of nanocrystalline carbide in tungsten alloy by mechanical alloying and annealing
由: Liu, Z.G., et al.
出版: (2014)

Wear of Mg-5%Al-5%Nd alloy with nanocrystalline grain size
由: Lim, C.Y.H., et al.
出版: (2014)

Evolution and characterization of a Ni3Al intermetallic compound during mechanical alloying
由: Lu, L., et al.
出版: (2014)

Diffusion in mechanical alloying
由: Lu, L., et al.
出版: (2014)

Structural changes and thermal stability of mechanically alloyed Ti-Al powders with additions of Mn and Nb
由: Lu, L., et al.
出版: (2014)

Mechanical properties and microstructure of Magnesium Alloy from Severe Plastic Deformation
由: SU CHUN WEI
出版: (2010)

DEVELOPMENT OF HIGH-PERFORMANCE QUATERNARY Mg-Y-Zn-Al ALLOYS AND NANOCOMPOSITES FOR LIGHTWEIGHTING APPLICATIONS IN ST KINETICS LAND SYSTEMS
由: TAN XINGHE
出版: (2017)

Microstructure and Properties of Semi-Solid Al Alloy 7075 after Heat Treatment
由: Narissara Mahathaninwong
出版: (2013)

Effects of strain rate on tensile properties of pure Mg and in situ AlN reinforced Mg-5Al composite
由: Thein, M.A., et al.
出版: (2014)

From waste to high strength alloy - Recycling of magnesium chips
由: Lu, L., et al.
出版: (2014)

From waste to high strength alloy - Recycling of magnesium chips
由: Lu, L., et al.
出版: (2014)

The influence of heat treatment on the corrosion behaviour of amorphous melt-spun binary Mg-18 at.% Ni and Mg-21 at.% Cu alloy
由: Ong, M.S., et al.
出版: (2014)

Introducing a High Performance Mg-Based Multicomponent Alloy as an Alternative to Al-Alloys
由: Tun, K.S., et al.
出版: (2021)

Effect of graphenenano-platelets on the mechanical properties of Mg/3wt%Al alloy-nanocomposite
由: Kumar P., et al.
出版: (2020)

Tribological characteristics of nanocrystalline copper
由: Shanthi, M., et al.
出版: (2014)

Processing and Mechanical Properties of Pure Mg and in-situ AlN Reinforced Mg-5Al Composite
由: MAUNG AYE THEIN
出版: (2010)

Structures, properties and responses to heat treatment of Cu-Y alloys prepared by mechanical alloying
由: Tan, L.K., et al.
出版: (2014)

Mechanical characterization of graphene nanoplateletsreinforced mg-3sn alloy synthesized by powder metallurgy
由: Kumar, Pravir, et al.
出版: (2022)

Formation of new materials in the solid state by mechanical alloying
由: Lu, L., et al.
出版: (2014)

In situ TiB2 reinforced Al alloy composites
由: Lü, L., et al.
出版: (2014)

Microstructural optimization through heat treatment for enhancing the fracture toughness and fatigue crack growth resistance of selective laser melted Ti–6Al–4V alloy
由: Kumar, Punit, et al.
出版: (2021)

Formation of Mg-Al-Ti/MgO composite via reduction of TiO2
由: Lai, M.O., et al.
出版: (2014)

Dissolution of Mg-based Mg-Ni-Nd amorphous alloys in 3% NaCl solution
由: Li, Y., et al.
出版: (2014)

Feasibility study on utilizing carbon dioxide during the processing of Mg-Al alloys
由: Subramanian, J., et al.
出版: (2014)