Performance evaluation of cryogenically treated tungsten carbide tools in turning

Performance evaluation of cryogenically treated tungsten carbide tools in turning

10.1016/j.ijmachtools.2006.01.002

Saved in:

書目詳細資料
Main Authors:	Yong, A.Y.L., Seah, K.H.W., Rahman, M.
其他作者:	MECHANICAL ENGINEERING
格式:	Article
出版:	2014
主題:	Cryogenic treatment Tungsten carbide Wear
在線閱讀:	http://scholarbank.nus.edu.sg/handle/10635/61067
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Performance of cryogenically treated tungsten carbide tools in milling operations
由: Yong, A.Y.L., et al.
出版: (2014)

Performance evaluation of cryogenically treated tungsten carbide cutting tool inserts
由: Seah, K.H.W., et al.
出版: (2014)

Cryogenic treatment of cutting tools
由: YONG YUN LEONG, ANDREW
出版: (2010)

CBN tool wear in ductile cutting of tungsten carbide
由: Liu, K., et al.
出版: (2014)

Characteristics of high speed micro-cutting of tungsten carbide
由: Liu, K., et al.
出版: (2014)

Wear of TiC-coated carbide tools in dry turning
由: Lim, C.Y.H., et al.
出版: (2014)

Mechanical characterization of cryogenically treated music wire
由: Chen, J.M., et al.
出版: (2014)

Ductile cutting of tungsten carbide
由: Liu, K., et al.
出版: (2014)

Study of the surface integrity of the machined workpiece in the EDM of tungsten carbide
由: Lee, S.H., et al.
出版: (2014)

A STUDY OF THE OPTIMUM PARAMETERS IN EDM MACHINING OF TUNGSTEN CARBIDE MATERIAL
由: KHIN MOE AYE
出版: (2020)

Study of micro-EDM of tungsten carbide with workpiece vibration
由: Jahan, M.P., et al.
出版: (2014)

Migration of materials during finishing micro-EDM of tungsten carbide
由: Jahan, M.P., et al.
出版: (2014)

A review on the conventional and micro-electrodischarge machining of tungsten carbide
由: Jahan, M.P., et al.
出版: (2014)

Nanometer-scale ductile cutting of tungsten carbide
由: Liu, K., et al.
出版: (2014)

Study of ductile mode cutting in grooving of tungsten carbide with and without ultrasonic vibration assistance
由: Liu, K., et al.
出版: (2014)

Effects of AGG on fracture toughness of tungsten carbide
由: Li, T., et al.
出版: (2014)

Characteristics of ultrasonic vibration-assisted ductile mode cutting of tungsten carbide
由: Liu, K., et al.
出版: (2014)

Machinability study of tungsten carbide using PCD tools under ultrasonic elliptical vibration cutting
由: Nath, C., et al.
出版: (2014)

Micro-ball endmilling of tungsten carbide for micro-molding and prototyping applications
由: Arif, M., et al.
出版: (2014)

A comparative study on the performance of sinking and milling micro-EDM for nanofinishing of tungsten carbide
由: Jahan, M.P., et al.
出版: (2014)

A study on the effect of tool nose radius in ultrasonic elliptical vibration cutting of tungsten carbide
由: Nath, C., et al.
出版: (2014)

Effects of lower cobalt binder concentrations in sintering of tungsten carbide
由: Li, T., et al.
出版: (2014)

A study on the fine-finish die-sinking micro-EDM of tungsten carbide using different electrode materials
由: Jahan, M.P., et al.
出版: (2014)

Machining conditions and the wear of TiC-coated carbide tools
由: Lim, C.Y.H., et al.
出版: (2014)

Modelling and experimental investigation on the effect of nanopowder-mixed dielectric in micro-electrodischarge machining of tungsten carbide
由: Jahan, M.P., et al.
出版: (2014)

A study on the quality micro-hole machining of tungsten carbide by micro-EDM process using transistor and RC-type pulse generator
由: Jahan, M.P., et al.
出版: (2014)

Study of the effect of machining parameters on the machining characteristics in electrical discharge machining of tungsten carbide
由: Lee, S.H., et al.
出版: (2014)

Development, modeling, and experimental investigation of low frequency workpiece vibration-assisted micro-EDM of tungsten carbide
由: Jahan, M.P., et al.
出版: (2014)

Abnormal Grain Growth of Tungsten Carbide in Small Amount of Cobalt: Mechanism and Application
由: LI TAO
出版: (2019)

Evaluation of wear mechanisms of Y-TZP and tungsten carbide punches
由: Myint, M.H., et al.
出版: (2014)

A NOVEL CRYOGENIC PREPARATION TECHNIQUE FOR NEAR-INSTANTANEOUS VITRIFICATION OF BIOLOGICAL SPECIMENS
由: GU JING
出版: (2017)

MICRO-EDM-BASED MULTI-PROCESS MACHINING OF TUNGSTEN CARBIDE
由: MUHAMMAD PERVEJ JAHAN
出版: (2010)

Cryogenic temperature resilient digital circuit design
由: Rajagopal Karthik
出版: (2024)

Cryogenic treatment of music wire
由: CHEN JER MING
出版: (2010)

On-machine fabrication of high-aspect-ratio micro-electrodes and application in vibration-assisted micro-electrodischarge drilling of tungsten carbide
由: Jahan, M.P., et al.
出版: (2014)

An experimental investigation on the surface characteristics of tungsten carbide for the fine-finish die-sinking and scanning micro-EDM
由: Jahan, M.P., et al.
出版: (2014)

Influence of banded ε-martensite and deformation twin on cryogenic toughness of Fe–Mn–xAl–C steel
由: Li, Leilei, et al.
出版: (2024)

INVESTIGATION ON CRYOGENIC EFFECT ON LNG BUNKERING MEASUREMENT BY CORIOLIS FLOWMETER
由: EVGENIIA SHAVRINA
出版: (2023)

Modeling and simulation of main cryogenic heat exchanger in a base-load liquefied natural gas plant
由: Faruque Hasan, M., et al.
出版: (2014)

Work material and the effectiveness of coated tools
由: Lim, C.Y.H., et al.
出版: (2014)