Mechanical characterization of graphene nanoplateletsreinforced mg-3sn alloy synthesized by powder metallurgy

Mechanical characterization of graphene nanoplateletsreinforced mg-3sn alloy synthesized by powder metallurgy

10.3390/met11010062

Saved in:

書目詳細資料
Main Authors:	Kumar, Pravir, Skotnicova, Katerina, Mallick, Ashis, Gupta, Manoj, Cegan, Tomas, Jurica, Jan
其他作者:	COLLEGE OF DESIGN AND ENGINEERING
格式:	Article
出版:	MDPI AG 2022
主題:	Alloy Magnesium Mechanical properties Microstructure Nanocomposite Synthesis
在線閱讀:	https://scholarbank.nus.edu.sg/handle/10635/233802
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Development of novel lightweight metastable metal-(metal + ceramic) composites using a new powder metallurgy approach
由: Tun, K.S., et al.
出版: (2021)

Effect of Deformation and Temperature Paths in Severe Plastic Deformation Using Groove Pressing on Microstructure, Texture, and Mechanical Properties of AZ31-O
由: Fong, Kai Soon, et al.
出版: (2016)

Fabrication and Microstructure of Mechanically Alloyed Mg-Al-Nd Alloys
由: Yan, C., et al.
出版: (2014)

Synthesis and mechanical properties of nanostructured Mg-Al-Nd alloys
由: Yan, C., et al.
出版: (2014)

Carbon nanotube addition to concentrated magnesium alloy AZ81: Enhanced ductility with occasional significant increase in strength
由: Paramsothy, M., et al.
出版: (2014)

Fabrication and characteristics of magnesium alloys produced via powder metallurgy
由: Cao, P., et al.
出版: (2014)

Effect of Ag and Cu trace additions on the microstructural evolution and mechanical properties of Mg-5Sn alloy
由: Jayalakshmi, S., et al.
出版: (2014)

Microstructure, thermal and mechanical response of AZ51/Al2O3 nanocomposite with 2wt.% Ca addition
由: Alam, M.E., et al.
出版: (2014)

Introducing a High Performance Mg-Based Multicomponent Alloy as an Alternative to Al-Alloys
由: Tun, K.S., et al.
出版: (2021)

Effect of addition of nano-al2o3 and copper particulates and heat treatment on the tensile response of az61 magnesium alloy
由: Nguyen, Q.B., et al.
出版: (2014)

Effect of nano-alumina and copper micron size particulates on microstructure and mechanical properties of magnesium alloy AZ31
由: Nguyen, Q.B., et al.
出版: (2014)

Simultaneous effect of nano-Al 2O 3 and micrometre Cu particulates on microstructure and mechanical properties of magnesium alloy AZ31
由: Nguyen, Q.B., et al.
出版: (2014)

Feasibility study on utilizing carbon dioxide during the processing of Mg-Al alloys
由: Subramanian, J., et al.
出版: (2014)

Characterization of high performance Mg/MgO nanocomposites
由: Goh, C.S., et al.
出版: (2014)

Structural, physical and mechanical properties of Mg-Al alloys processed under CO 2 atmosphere
由: Jayalakshmi, S., et al.
出版: (2014)

Effect of graphenenano-platelets on the mechanical properties of Mg/3wt%Al alloy-nanocomposite
由: Kumar P., et al.
出版: (2020)

Microstructure and Mechanical Properties of a Mg-5Al Alloy Synthesized by Mechanical Alloying
由: Gao, X., et al.
出版: (2014)

Enhancing tensile/compressive response of magnesium alloy AZ31 by integrating with Al2O3 nanoparticles
由: Paramsothy, M., et al.
出版: (2014)

Influence of Overlapping Tracks on Microstructure Evolution and Corrosion Behavior in Laser-melt Magnesium Alloy
由: Guan, Ying Chun, et al.
出版: (2016)

Corrosion behavior, microstructure and mechanical properties of novel mg-zn-ca-er alloy for bio-medical applications
由: Panemangalore, Devadas Bhat, et al.
出版: (2022)

DEVELOPMENT OF HIGH-PERFORMANCE QUATERNARY Mg-Y-Zn-Al ALLOYS AND NANOCOMPOSITES FOR LIGHTWEIGHTING APPLICATIONS IN ST KINETICS LAND SYSTEMS
由: TAN XINGHE
出版: (2017)

Improving microstructural and mechanical response of new AZ41 and AZ51 magnesium alloys through simultaneous addition of nano-sized Al 2O3 particulates and Ca
由: Alam, M.E., et al.
出版: (2014)

Enhancing corrosion resistance of Mg alloy AZ31B in NaCl solution using alumina reinforcement at nanolength scale
由: Kukreja, M., et al.
出版: (2014)

Processing, microstructure, and properties of a Mg/Al bimetal macrocomposite
由: Paramsothy, M., et al.
出版: (2014)

The Origin of High Strength and High Ductility in Nanostructured Mg-5%Al-x%Nd Alloys
由: Lu, L., et al.
出版: (2014)

Improving compressive strength and oxidation resistance of AZ31B magnesium alloy by addition of nano-Al2O3 particulates and Ca
由: Nguyen, Q.B., et al.
出版: (2014)

Selective enhancement of tensile/compressive strength and ductility of AZ31 magnesium alloy via nano-AL2O3 reinforcement integration method alteration
由: Paramsothy, M., et al.
出版: (2014)

Processing maps, microstructure evolution and deformation mechanisms of extruded AZ31-DMD during hot uniaxial compression
由: Zhong, T., et al.
出版: (2014)

The static and cyclic deformation behaviours Mg-Y2O3 nanocomposites
由: Goh, C.S., et al.
出版: (2014)

Development of novel lightweight metastable metal - (metal + ceramic) composites using a new powder metallurgy approach
由: Tun, Khin Sandar, et al.
出版: (2021)

Wear of Mg-5%Al-5%Nd alloy with nanocrystalline grain size
由: Lim, C.Y.H., et al.
出版: (2014)

Exceptional increase in the creep life of magnesium rare-earth alloys due to localized bond stiffening
由: Choudhuri, Deep, et al.
出版: (2018)

Characterization of Mg/MgO nanocomposites synthesized using powder metallurgy technique
由: Goh, C.S., et al.
出版: (2014)

Creation of high performance Mg based composite containing nano-size Al 2O 3 particulates as reinforcement
由: Hassan, S.F., et al.
出版: (2014)

Development of rare-earth oxide reinforced magnesium nanocomposites for orthopaedic applications: A mechanical/immersion/biocompatibility perspective
由: Kujur, Milli Suchita, et al.
出版: (2021)

Properties and deformation behaviour of Mg-Y2O3 nanocomposites
由: Goh, C.S., et al.
出版: (2014)

Comparison study on additive manufacturing (AM) and powder metallurgy (PM) AlSi10Mg alloys
由: Chen, Biao, et al.
出版: (2020)

Development of new magnesium based alloys and their nanocomposites
由: Alam, M.E., et al.
出版: (2014)

Rate-dependent hardening due to twinning in an ultrafine-grained magnesium alloy
由: Li, B., et al.
出版: (2014)

Development of Nano-composites Based on Magnesium Alloys System AZ31B
由: NGUYEN QUY BAU
出版: (2010)