MEDIUM AND HIGH ENTROPY ALLOYS: DESIGN AND ADDITIVE MANUFACTURING

MEDIUM AND HIGH ENTROPY ALLOYS: DESIGN AND ADDITIVE MANUFACTURING

Ph.D

Saved in:

書目詳細資料
主要作者:	MEHMET CAGIRICI
其他作者:	MATERIALS SCIENCE AND ENGINEERING
格式:	Theses and Dissertations
語言:	English
出版:	2021
主題:	Medium Entropy Alloy, High Entropy Alloy, Alloy Development, Microstructural Evolution, Mechanical Properties, Additive Manufacturing
在線閱讀:	https://scholarbank.nus.edu.sg/handle/10635/209457
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Pulsed-wave laser additive manufacturing of CrCoNi medium-entropy alloys with high strength and ductility
由: Gao, Shubo, et al.
出版: (2025)

Unveiling the oxidation mechanism of CrTaTiMo refractory medium-entropy alloys: a synergy of density functional theory and ab initio molecular dynamics
由: Wang, Xiao, et al.
出版: (2024)

Effect of tungsten doping on the irradiation resistance of FeCrV-based refractory medium entropy alloy for potential nuclear applications
由: Hobhaydar, Arman, et al.
出版: (2023)

Revealing hot tearing mechanism for an additively manufactured high-entropy alloy via selective laser melting
由: Sun, Zhongji, et al.
出版: (2020)

Recent advances on high-entropy alloys for 3D printing
由: Han, Changjun, et al.
出版: (2020)

Effect of aluminum on the friction and wear behavior of AlₓCrFeNi medium-entropy alloys
由: Qiao, Ling, et al.
出版: (2022)

Additive manufacturing of high-strength alloys for marine and offshore applications
由: Lek, Yung Zhen
出版: (2025)

Tailoring short-range order and dislocation evolution in Cr–Co–Ni medium-entropy alloys: a molecular dynamics study
由: Jarlöv, Asker, et al.
出版: (2024)

A combinatorial assessment of AlxCrCuFeNi2 (0 < x < 1.5) complex concentrated alloys: Microstructure, microhardness, and magnetic properties
由: Borkar, T., et al.
出版: (2016)

Influence of hydrogen on incipient plasticity in CoCrFeMnNi high-entropy alloy
由: Yang, Guanghui, et al.
出版: (2021)

Nano-graining a particle-strengthened high-entropy alloy
由: Lee, Dong-Hyun, et al.
出版: (2021)

In situ synthesis and microfabrication of high entropy alloy and oxide compounds by femtosecond laser direct writing under ambient conditions
由: Hegde, Chidanand, et al.
出版: (2022)

Compositionally graded CoCrFeNiTₓ high-entropy alloys manufactured by laser powder bed fusion: a combinatorial assessment
由: Zhao, Yakai, et al.
出版: (2022)

Effect of segregation on deformation behaviour of nanoscale CoCrCuFeNi high-entropy alloy
由: Kazakov, Arseny M., et al.
出版: (2023)

Effect of short-range ordering and grain boundary segregation on shear deformation of CoCrFeNi high-entropy alloys with Al addition
由: Babicheva, Rita, et al.
出版: (2022)

Twin-coupled shear bands in an ultrafine-grained CoCrFeMnNi high-entropy alloy deformed at 77K
由: Li, Xiyao, et al.
出版: (2022)

High entropy alloys for hydrogen production
由: Ho, Benjamin An
出版: (2024)

Fabrication and characterisation of CrMnFeCoNi high entropy alloy electrocatalyst for oxygen evolution reaction
由: Cao, Xun
出版: (2024)

Influences of hydrogen charging method on the hydrogen distribution and nanomechanical properties of face-centered cubic high-entropy alloy : a comparative study
由: Zhao, Yaki, et al.
出版: (2021)

Inhibiting the inverse Hall-Petch behavior in CoCuFeNiPd high-entropy alloys with short-range ordering and grain boundary segregation
由: Ji, Weiming, et al.
出版: (2022)

Microstructure and Mechanical Properties of a Mg-5Al Alloy Synthesized by Mechanical Alloying
由: Gao, X., et al.
出版: (2014)

Additively manufactured CuCrZr alloy: Microstructure, mechanical properties and machinability
由: BAI YUCHAO, et al.
出版: (2021)

Fabrication and Microstructure of Mechanically Alloyed Mg-Al-Nd Alloys
由: Yan, C., et al.
出版: (2014)

Self-reconstructed spinel surface structure enabling the long-term stable hydrogen evolution reaction/oxygen evolution reaction efficiency of FeCoNiRu high-entropy alloyed electrocatalyst
由: Huang, Kang, et al.
出版: (2023)

Effect of Ag and Cu trace additions on the microstructural evolution and mechanical properties of Mg-5Sn alloy
由: Jayalakshmi, S., et al.
出版: (2014)

Effect of dual phase structure induced by chemical segregation on hot tearing reduction in additive manufacturing
由: Guo, Chaoyang, et al.
出版: (2023)

Atomically dispersed intrinsic hollow sites of M-M₁-M (M₁ = Pt, Ir; M = Fe, Co, Ni, Cu, Pt, Ir) on FeCoNiCuPtIr nanocrystals enabling rapid water redox
由: Lu, Yu, et al.
出版: (2022)

Design and modeling of novel high-entropy alloys for laser powder bed fusion
由: Jarlöv, Asker
出版: (2025)

The Origin of High Strength and High Ductility in Nanostructured Mg-5%Al-x%Nd Alloys
由: Lu, L., et al.
出版: (2014)

Microstructure and mechanical behavior of laser aided additive manufactured low carbon interstitial Fe₄₉.₅Mn₃₀Co₁₀Cr₁₀C₀.₅ multicomponent alloy
由: Chew, Youxiang, et al.
出版: (2022)

Synthesis and mechanical properties of nanostructured Mg-Al-Nd alloys
由: Yan, C., et al.
出版: (2014)

Structural changes and thermal stability of mechanically alloyed Ti-Al powders with additions of Mn and Nb
由: Lu, L., et al.
出版: (2014)

Optical orientation mapping of additively manufactured alloys using directional reflectance microscopy
由: Matteo, Seita, et al.
出版: (2023)

Comparative study on Young's modulus measurements on additively manufactured alloys
由: Lim, Gordon Yicai
出版: (2024)

Introducing a High Performance Mg-Based Multicomponent Alloy as an Alternative to Al-Alloys
由: Tun, K.S., et al.
出版: (2021)

Structure and properties of Mg-Al-Ti-B alloys synthesized via mechanical alloying
由: Lu, L., et al.
出版: (2014)

Mechanical properties and interfacial characterization of additive-manufactured CuZrCr/CoCrMo multi-metals fabricated by powder bed fusion using pulsed wave laser
由: Zhang, Hao, et al.
出版: (2024)

Mechanical characterization of graphene nanoplateletsreinforced mg-3sn alloy synthesized by powder metallurgy
由: Kumar, Pravir, et al.
出版: (2022)

Enhanced damping of a magnesium alloy by addition of copper
由: Srikanth, N., et al.
出版: (2014)

Carbon nanotube addition to concentrated magnesium alloy AZ81: Enhanced ductility with occasional significant increase in strength
由: Paramsothy, M., et al.
出版: (2014)