Synthesis of aluminium-iron-silicide intermetallics

Synthesis of aluminium-iron-silicide intermetallics

Conventional manufacturing methods such as casting, powder sintering could be adopted for the production of intermetallics. However, the method based on the principle of self-propagating high temperature synthesis (SHS appears to be promising for ease production [1.2]The aluminium based intermetall...

Saved in:

書目詳細資料
主要作者:	Sritharan, Thirumany.
其他作者:	School of Materials Science & Engineering
格式:	Research Report
出版:	2008
主題:	DRNTU::Engineering::Materials::Metallic materials
在線閱讀:	http://hdl.handle.net/10356/6774
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!
機構:	Nanyang Technological University

相似書籍

Improvement to the AlFeSi intermetallic production process
由: Liu, Yingsha.
出版: (2008)

Formation of intermetallic alloys through thermal spraying and TIG melting processes
由: Mridha, Shahjahan.
出版: (2008)

Mechanical behaviour of Aluminium foam
由: Prasanna Kumar H.
出版: (2008)

Ni(Pt) alloy silicidation on (100) Si and poly-silicon lines
由: Pey, Kin Leong, et al.
出版: (2013)

Aluminium metallic glass mechanical testing and characterisation
由: Ng, Geraldine Li Lan.
出版: (2011)

Deformation and fracture of Titanium and Aluminium alloys
由: Chew, Kia Guan.
出版: (2008)

Controlled synthesis of copper-silicide nanostructures
由: Li, Shaozhou, et al.
出版: (2011)

Combined mode fracture of three aluminium alloys
由: Oruganti Rajmohan Kashyap
出版: (2008)

Synthesis of hexagonal-symmetry α-iron oxyhydroxide crystals using reduced graphene oxide as a surfactant and their Li storage properties
由: Lim, Tuti Mariana, et al.
出版: (2013)

Processing and characterization of cast aluminium alloy : SiCp composites
由: Bindumadhavan, Pathangi N.
出版: (2008)

Investigation of the influence of sol-gel coating composition on the corrosion protection of aluminium alloy
由: Tan, Gareth Tze Yuen.
出版: (2009)

Nanostructured soft magnetic materials by ball milling
由: Sritharan, Thirumany.
出版: (2008)

Effects of process parameters on the microstructure and mechanical properties of a squeeze cast aluminium alloy
由: Chua, Philip Chiew Ho.
出版: (2009)

Synthesis and characterization of metal silicides nanostructures
由: Li, Shaozhou.
出版: (2013)

FIB-SEM investigation of trapped intermetallic particles in anodic oxide films on AA1050 aluminium
由: M. Jariyaboon, et al.
出版: (2018)

The role of surface grinding, intermetallic precipitates and halide ions on zinc deposition and adhesion on aluminium cathode in zinc electrowinning
由: Sankum Nusen, et al.
出版: (2018)

Equal channel angular extrusion (ECAE) of intermetallics
由: Anumalasetty Venkata Nagasekhar
出版: (2008)

Additive manufacturing of a nickel–aluminium–bronze alloy via directed energy deposition
由: Li, Boyuan
出版: (2023)

Micro-Raman spectroscopy investigation of nickel silicides and nickel (platinum) silicides
由: Mangelinck, D., et al.
出版: (2012)

Microstructural changes caused by deep cold rolling and their effects on fatigue life of ductile iron
由: Su, Zhenlin
出版: (2015)

Synthesis & investigation of novel transition metal oxides
由: Dong, Zhili
出版: (2009)

Material for advanced technologies
由: Ma, Jan, et al.
出版: (2008)

Synthesis and characterization of transparent hydrophobic sol-gel hard coatings
由: Wu, Linda Y. L., et al.
出版: (2013)

Pemanfaatan Limbah Abu Terbang Sebagai Penguat Aluminium Matrix Composite
由: Subarmono, Subarmono, et al.
出版: (2008)

Intermetallic formation and oxidation in AL-AU system
由: Xu, Cong
出版: (2008)

Scientific and technological assessment of iron pyrite for use in solar devices
由: Shukla, Sudhanshu, et al.
出版: (2019)

Synthesis of electrode materials for aluminium aqueous batteries
由: Tan, Ivan Fu Xing
出版: (2019)

On the morphological changes of Ni- and Ni(Pt)-silicides
由: Mangelinck, D., et al.
出版: (2012)

Laser induced Ni(Ti) silicide formation
由: Setiawan, Y., et al.
出版: (2012)

Utilization of fly ash waste as reinforcement of aluminium matrix composite produced using powder metallurgy (Pemanfaatan Limbah abu terbang sebagai penguat aluminium metal matrix composite dibuat dengan cara metalurgi serbuk)
由: Subarmono, Subarmono, et al.
出版: (2011)

Fracture toughness of Cu-Sn intermetallic thin films
由: Li, M., et al.
出版: (2012)

Cold spray deposition of aluminium and aluminium oxide
由: Liu, Yuman.
出版: (2010)

VARIASI PERUBAHAN PUTARAN PADA PENGECORAN ALUMINIUM BENTUK PULI DENGAN METODE CENTRIFUGAL CASTING TERHADAP PENINGKATAN KEKUATAN MEKANIK
由: Santoso, Nugroho, et al.
出版: (2015)

Pyramidal structural defects in erbium silicide thin films
由: Srolovitz, David J., et al.
出版: (2012)

Self-propagating high-temperature synthesis (SHS) of porous parts using nanocrystalline NiTi
由: Goh, Francis Chung Wen
出版: (2008)

PENGARUH TUNGSTEN TERHADAP KEAUSAN MATERIAL ABRASION-RESISTANT CAST IRON
由: Setyana, Lilik Dwi, et al.
出版: (2013)

Controllable galvanic synthesis of triangular Ag-Pd alloy nanoframes for efficient electrocatalytic methanol oxidation
由: Xu, Lin, et al.
出版: (2015)

Effect of Ni-coated carbon nanotubes on interfacial intermetallic layer growth
由: Nai, S. M. L., et al.
出版: (2010)

Effect of Ti alloying in nickel silicide formation
由: Setiawan, Y., et al.
出版: (2013)

Study of process responses, intermetallic formation and reliability of palladium-coated copper wire bonds
由: Lim, Adeline Bee Yen
出版: (2016)