Microstructure and mechanical properties of a Monel K-500 alloy fabricated by directed energy deposition

Microstructure and mechanical properties of a Monel K-500 alloy fabricated by directed energy deposition

Directed energy deposition (DED) is a mainstream metal additive manufacturing technique that can fabricate near-net-shape components and repair damaged parts with a high build rate. Monel K-500 is a Ni-based alloy widely used for marine and offshore applications because of its excellent corrosion re...

Saved in:

書目詳細資料
Main Authors:	Chen, Ze, Wang, Chengcheng, Tang, Chao, Lek, Yung Zhen, Kandukuri, Sastry Yagnanna, Du, Hejun, Gao, Huajian, Zhou, Kun
其他作者:	School of Mechanical and Aerospace Engineering
格式:	Article
語言:	English
出版:	2023
主題:	Engineering::Mechanical engineering Directed Energy Deposition Microstructure Evolution
在線閱讀:	https://hdl.handle.net/10356/170433
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Heterogeneous microstructure and mechanical properties of Monel alloy parts repaired by laser directed energy deposition
由: Chen, Ze, et al.
出版: (2024)

Laser-based directed energy deposition of Monel K-500 and Stellite 6 multi-materials
由: Chen, Ze, et al.
出版: (2024)

Effect of grain structure on the mechanical properties of a Monel alloy fabricated by laser-based directed energy deposition
由: Chen, Ze, et al.
出版: (2023)

Multiscale microstructural heterogeneity and mechanical property scatter in Inconel 718 produced by directed energy deposition
由: Yeoh, Yong Chen, et al.
出版: (2021)

Directed energy deposition of metals: processing, microstructures, and mechanical properties
由: Li, Shihao, et al.
出版: (2022)

Corrosion behavior, microstructure and mechanical properties of novel mg-zn-ca-er alloy for bio-medical applications
由: Panemangalore, Devadas Bhat, et al.
出版: (2022)

Regarding the processing associated microstructure and mechanical properties improvement of an Al-4.5 Cu alloy
由: Gupta, M., et al.
出版: (2014)

In-situ alloying of maraging steel with enhanced mechanical properties and corrosion resistance by laser directed energy deposition
由: Lek, Yung Zhen, et al.
出版: (2024)

Additive manufacturing of corrosion-resistant maraging steel M789 by directed energy deposition
由: Lek, Yung Zhen, et al.
出版: (2023)

Nanotwins-containing microstructure and superior mechanical strength of a Cu‒9Al‒5Fe‒5Ni alloy additively manufactured by laser metal deposition
由: Li, Boyuan, et al.
出版: (2021)

The influence of process parameters on the microstructure and properties of the TiC/Ti-alloy composites fabricated by the directed energy deposition process
由: Wang, Yongxia, et al.
出版: (2025)

Microstructural evolution in the phase mixtures of Ti(C,N)-Mo at 1600°C
由: Qian, M., et al.
出版: (2014)

Processing-microstructure-mechanical properties of an Al-Cu/SiC metal matrix composite synthesized using disintegrated melt deposition technique
由: Gupta, M., et al.
出版: (2014)

Mitigating core energy losses in Fe-Si alloys fabricated by direct energy deposition through oxide inclusions and abnormal Goss grain growth
由: Shen, Xiaojun, et al.
出版: (2025)

Additive manufacturing of high-strength alloys for marine and offshore applications
由: Lek, Yung Zhen
出版: (2025)

Interrelationship between matrix microhardness and ultimate tensile strength of discontinuous particulate-reinforced aluminum alloy composites
由: Gupta, M., et al.
出版: (2014)

Wear of a spray-deposited hypereutectic aluminium-silicon alloy
由: Lim, S.C., et al.
出版: (2014)

Influence of microstructure on stainless steel 316L lattice structures fabricated by electron beam and laser powder bed fusion
由: Zeng, Zhuohong, et al.
出版: (2023)

Additive manufacturing of NiTi shape memory alloys using pre-mixed powders
由: Tor, Shu Beng, et al.
出版: (2019)

Microstructure, Magnetic and Microwave Properties of Spray Pyrolysis Deposited Ferrite and Electro-deposited Ferromagnetic Thin Films
由: PHUA LI XIAN
出版: (2013)

Evolution of the material microstructures and mechanical properties of AA1100 aluminum alloy within a complex porthole die during extrusion
由: Tang, D, et al.
出版: (2020)

Analysis of microstructural effects on mechanical properties of copper alloys
由: Okayasua, Mitsuhiro, et al.
出版: (2017)

Fabrication and Microstructure of Mechanically Alloyed Mg-Al-Nd Alloys
由: Yan, C., et al.
出版: (2014)

Microstructure and Mechanical Properties of a Mg-5Al Alloy Synthesized by Mechanical Alloying
由: Gao, X., et al.
出版: (2014)

Additive manufacturing of a monel alloy via directed energy deposition for marine and offshore applications
由: Chen, Ze
出版: (2024)

Directed energy deposition build process control effects on microstructure and tensile failure behaviour
由: Tan, Eddie Zhi’En, et al.
出版: (2022)

The study of Ni-Sn transient liquid phase bonded joints under high temperatures
由: Yan, Guangxu, et al.
出版: (2023)

Influence of Overlapping Tracks on Microstructure Evolution and Corrosion Behavior in Laser-melt Magnesium Alloy
由: Guan, Ying Chun, et al.
出版: (2016)

Effect of type of processing on the micro structural features and mechanical properties of Al-Cu/SiC metal matrix composites
由: Gupta, M., et al.
出版: (2014)

Nacre's brick–mortar structure suppresses the adverse effect of microstructural randomness
由: Yan, Yi, et al.
出版: (2023)

Effect of braze flux on direct laser sintering Cu-based metal powder
由: Zhu, H.H., et al.
出版: (2014)

Study on the microstructure and mechanical properties of a novel SWCNT-reinforced solder alloy for ultra-fine pitch applications
由: Kumar, K.M., et al.
出版: (2014)

Effect of nano-alumina and copper micron size particulates on microstructure and mechanical properties of magnesium alloy AZ31
由: Nguyen, Q.B., et al.
出版: (2014)

Mechanical properties and microstructure of Magnesium Alloy from Severe Plastic Deformation
由: SU CHUN WEI
出版: (2010)

A hybrid directed energy deposition process to manipulate microstructure and properties of austenitic stainless steel
由: Gao, Shubo, et al.
出版: (2022)

MEDIUM AND HIGH ENTROPY ALLOYS: DESIGN AND ADDITIVE MANUFACTURING
由: MEHMET CAGIRICI
出版: (2021)

Optimization of process parameters for laser cladding of a stellite alloy on monel alloy substrates
由: Tan, Renny Hui Yan
出版: (2024)

Simultaneous effect of nano-Al 2O 3 and micrometre Cu particulates on microstructure and mechanical properties of magnesium alloy AZ31
由: Nguyen, Q.B., et al.
出版: (2014)

Ordered mesoporous carbon particles covered with carbon nanotubes
由: Su, F., et al.
出版: (2014)

THE EFFECT OF HEAT TREATMENT PRECIPITATION HARDENING AND ABBRASIVE TIME ON WEAR RESISTANCE OF MONEL K-500 MATERIAL.
由: Hermawan, Arviansyah