Designed synthesis of FeₓCo₁₀₀₋ₓ alloy nanoparticles by polyol reduction: an evolution of structural, morphological and magnetic properties

Designed synthesis of FeₓCo₁₀₀₋ₓ alloy nanoparticles by polyol reduction: an evolution of structural, morphological and magnetic properties

FexCo100-x nanoparticles with different stoichiometry (x = 0-100) have been prepared by a facile synthesis process and compositions confirmed using X-ray fluorescence spectroscopy. X-ray diffraction measurements suggest alloy formation in the body-centered cubic (BCC) phase, with a progressive shift...

Saved in:

書目詳細資料
Main Authors:	Moditma, Malik, Rakesh, Reddy, V. Raghavendra, Vas, Joseph Vimal, Medwal, Rohit, Annapoorni, S.
其他作者:	School of Materials Science and Engineering
格式:	Article
語言:	English
出版:	2022
主題:	Engineering::Materials Crystal Microstructure Iron Alloys
在線閱讀:	https://hdl.handle.net/10356/163784
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!
機構:	Nanyang Technological University
語言:	English

相似書籍

Microstructure and properties of Fe-base alloy fabricated using selective laser melting
由: Sun, M., et al.
出版: (2014)

Influence of Overlapping Tracks on Microstructure Evolution and Corrosion Behavior in Laser-melt Magnesium Alloy
由: Guan, Ying Chun, et al.
出版: (2016)

Microstructure and Mechanical Properties of a Mg-5Al Alloy Synthesized by Mechanical Alloying
由: Gao, X., et al.
出版: (2014)

Fabrication and Microstructure of Mechanically Alloyed Mg-Al-Nd Alloys
由: Yan, C., et al.
出版: (2014)

Atomistic investigation of effect of alloying on mechanical properties and microstructural evolution of ternary FeCo-X (X = V, Nb, Mo, W)
由: Muralles, Mario, et al.
出版: (2024)

Synthesis and mechanical properties of nanostructured Mg-Al-Nd alloys
由: Yan, C., et al.
出版: (2014)

Effect of Ag and Cu trace additions on the microstructural evolution and mechanical properties of Mg-5Sn alloy
由: Jayalakshmi, S., et al.
出版: (2014)

Additive manufacturing of high-strength alloys for marine and offshore applications
由: Lek, Yung Zhen
出版: (2025)

Effect of Deformation and Temperature Paths in Severe Plastic Deformation Using Groove Pressing on Microstructure, Texture, and Mechanical Properties of AZ31-O
由: Fong, Kai Soon, et al.
出版: (2016)

Study on the microstructure and mechanical properties of a novel SWCNT-reinforced solder alloy for ultra-fine pitch applications
由: Kumar, K.M., et al.
出版: (2014)

Introducing a High Performance Mg-Based Multicomponent Alloy as an Alternative to Al-Alloys
由: Tun, K.S., et al.
出版: (2021)

MEDIUM AND HIGH ENTROPY ALLOYS: DESIGN AND ADDITIVE MANUFACTURING
由: MEHMET CAGIRICI
出版: (2021)

Effects of copper addition on thermoelectric properties of B-FeSi2 prepared by mechanical alloying
由: Panuwat Attachotsakda
出版: (2010)

Effects of copper addition on thermoelectric properties of B-FeSi2 prepared by mechanical alloying
由: Panuwat Attachotsakda
出版: (2006)

Amorphous magnetic RE-Fe-Al alloys
由: Hui Zi Kong, et al.
出版: (2014)

Mechanical characterization of graphene nanoplateletsreinforced mg-3sn alloy synthesized by powder metallurgy
由: Kumar, Pravir, et al.
出版: (2022)

A DSC study on the precipitation kinetics of cryorolled Al 6063 alloy
由: Panigrahi, S.K., et al.
出版: (2014)

Nickel-iron alloy supported over iron-alumina catalysts for steam reforming of biomass tar model compound
由: Ashok, J., et al.
出版: (2014)

Wear of a spray-deposited hypereutectic aluminium-silicon alloy
由: Lim, S.C., et al.
出版: (2014)

Rapid solidification behavior of Zn-rich Zn-Ag peritectic alloys
由: Xu, W., et al.
出版: (2014)

Mechanical properties and microstructure of Magnesium Alloy from Severe Plastic Deformation
由: SU CHUN WEI
出版: (2010)

Feasibility study on utilizing carbon dioxide during the processing of Mg-Al alloys
由: Subramanian, J., et al.
出版: (2014)

Cellular growth of Zn-rich Zn-Ag alloys processed by rapid solidification
由: Xu, W., et al.
出版: (2014)

Evolution of local atomic structure in a melt-spun Ni25Ti 50Cu25 shape memory alloy during crystallization
由: Zarinejad, M., et al.
出版: (2014)

Hardfacing studies of Ni alloys: A critical review
由: Balaguru, S., et al.
出版: (2022)

Pinpoint the best glass forming alloy by microstructure study in Cu 8Zr3-Cu10Zr7eutectic system of Cu-Zr binary system
由: Wang, D., et al.
出版: (2014)

Carbon nanotube addition to concentrated magnesium alloy AZ81: Enhanced ductility with occasional significant increase in strength
由: Paramsothy, M., et al.
出版: (2014)

Rate-dependent hardening due to twinning in an ultrafine-grained magnesium alloy
由: Li, B., et al.
出版: (2014)

Processing maps, microstructure evolution and deformation mechanisms of extruded AZ31-DMD during hot uniaxial compression
由: Zhong, T., et al.
出版: (2014)

Observation of lamellar structure in a Zn-rich Zn-6.3at.% Ag hyper-peritectic alloy processed by rapid solidification
由: Xu, W., et al.
出版: (2014)

Development of Nano-composites Based on Magnesium Alloys System AZ31B
由: NGUYEN QUY BAU
出版: (2010)

The mechanical behavior of magnesium alloy AZ91 reinforced with fine copper particulates
由: Ho, K.F., et al.
出版: (2014)

Abrasive wear resistance of hypoeutectic 26 mass% chromium cast iron containing molybdenum
由: Attasit Chooprajong
出版: (2011)

Thermodynamic mechanisms of mechanical crystallization of amorphous Fe-N alloy
由: Liu, L., et al.
出版: (2014)

DESIGN AND FABRICATION OF NITICU SHAPE MEMORY ALLOYS
由: GAO CHENKAI
出版: (2024)

Ternary cobalt-iron phosphide nanocrystals with controlled compositions, properties, and morphologies from nanorods and nanorice to split nanostructures
由: Ye, E., et al.
出版: (2014)

Development of ductile magnesium composite materials using titanium as reinforcement
由: Hassan, S.F., et al.
出版: (2014)

Bulk hard magnetic alloys in Nd-Fe-B system prepared by casting and melt spinning
由: Kong, H.Z., et al.
出版: (2014)

Additively manufactured CuCrZr alloy: Microstructure, mechanical properties and machinability
由: BAI YUCHAO, et al.
出版: (2021)

Structural, physical and mechanical properties of Mg-Al alloys processed under CO 2 atmosphere
由: Jayalakshmi, S., et al.
出版: (2014)