Wear of Mg-5%Al-5%Nd alloy with nanocrystalline grain size

由 Lim, C.Y.H., Lu, L.
出版 2014

Elucidating the specific and combined effects of particle size, impact angle, velocity and stress from an external load on the slurry erosion of mild steel S275JR

由 Venkatraman Krishnan, Anirudh, Lim, C. Y. H.
出版 2022

Effective use of coated tools - The wear-map approach

由 Lim, S.C., Lim, C.Y.H.
出版 2014

Machining conditions and the wear of TiC-coated carbide tools

由 Lim, C.Y.H., Lim, S.-C., Lee, K.-S.
出版 2014

Tribological characteristics of nanocrystalline copper

由 Shanthi, M., Lim, C.Y.H., Gupta, M.
出版 2014

Effects of grain size on the wear of recycled AZ91 Mg

由 Shanthi, M., Lim, C.Y.H., Lu, L.
出版 2014

Machining conditions and the wear of TiC-coated carbide tools

由 Lim, C.Y.H., Lim, S.-C., Lee, K.-S.
出版 2014

Wear of Magnesium Composites with Continuous, Interconnected Wire Reinforcement

由 Lim, C.Y.H., Lim, S.C., Gupta, M.
出版 2014

Crater wear mechanisms of TiN coated high speed steel tools

由 Lim, C.Y.H., Lim, S.C., Lee, K.S.
出版 2014

Wear behaviour of SiCp-reinforced magnesium matrix composites

由 Lim, C.Y.H., Lim, S.C., Gupta, M.
出版 2014

Development of a novel hybrid aluminum-based composite with enhanced properties

由 Gupta, M., Lai, M.O., Lim, C.Y.H.
出版 2014

The effects of machining conditions on the flank wear of tin-coated high speed steel tool inserts

由 Lim, S.C., Lim, C.Y.H., Lee, K.S.
出版 2014

Performance of TiN-coated high speed steel tool inserts in turning

由 Lim, C.Y.H., Lim, S.C., Lee, K.S.
出版 2014

Effect of reinforcements on strength of Mg9%Al composites

由 Lu, L., Lim, C.Y.H., Yeong, W.M.
出版 2014

Wear of TiC-coated carbide tools in dry turning

由 Lim, C.Y.H., Lim, S.C., Lee, K.S.
出版 2014

Crater wear of TiN coated high speed steel tool inserts

由 Lim, S.C., Lim, C.Y.H., Lee, K.S.
出版 2014

Synthesis and characterization of hybrid aluminum composites reinforced with Ni particulates and interconnected Fe mesh

由 Wong, W.L.E., Gupta, M., Lim, C.Y.H.
出版 2014

Synthesis and wear of Al based, free standing functionally gradient materials: Effects of different reinforcements

由 Nai, S.M.L., Gupta, M., Lim, C.Y.H.
出版 2014

Enhancing the mechanical properties of pure aluminum using hybrid reinforcement methodology

由 Wong, W.L.E., Gupta, M., Lim, C.Y.H.
出版 2014

The effects of using coated tools in the deep drawing of aluminium

由 Lee, K.S., Seah, K.H.W., Lim, C.Y.H.
出版 2014